How to Replace Front Brakes 2006-2011 Honda Civic

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@FlavorTownResident]

If your pads aren't OEM there's a chance they'll be slightly too long to slide into the bracket properly. You may need to file/grind down the ears until they fit smoothly. Would've saved me an hour or two of frustration had I known. Hope this saves you some time!

[@stumorningstar5170]

Thanks homie. Boutta change my break pads like a pro

[@Abraxaz]

Good looks just changed my brakes on my 06 Honda her name Ruby she a champ

[@Chadderall113]

If you have trouble getting the rotor screws out or you strip them, just drill them out. They aren’t necessary anyway

[@bitsinmyblood]

Wow this is fantastic instruction on how to thoroughly perform this replacement

[@obfsctr]

What anti-seize spray was used @4:49

[@tfs4693]

I believe the 2 rotor screw are not "phillips" but JIS screws which are different (a blunter tip) than american phillips. If they are frozen in; the american phillips will ruin the head and you'll have to drill them out.

[@simppatrol1224]

My break rotors won't come out, and I've taken out all the screws its rusted so I assume thats why but any recommendations?

[@cognac8297]

1aauto shown the break pad install backwards. Your video is right. Mine are done the way you did these. 1aauto that other guy did his backwards. . But this video installs the pads the right way the only way. There is no bi and half way. I did a break pad rotation last nigh. And fixed it. Cause it was causing break pull and lack of power and smells.and heat.

[@chanelm.2022]

I only have the parts. Not the cleaning agents or cool brushing you have 😅. I don't have the money for all that. Do you think I should just take it into the dealership?

[@retf054ewte3]

excellent video

[@badabingbadab00m]

Does the slide pin with bushing go on top or bottom? Thanks in advance

[@abdulsattarmohammed3676]

Thanks for sharing, ❤.

[@TheKid0309]

Do t you have to squeeze the calipers. Mine usually I have to use a vise or something like

[@kirillpushkin]

I have Honda Civic 2008 LX. I have ordered a set of front rotors with pads (S/N: BKA10834). You website says it should fit my model, but the caliper does not fit in with the pads in place. Plus the pads do not fit in tightly and fell out.

[@OldSchoolNoe]

has all needed info!

[@abdulsattarmohammed3676]

Thanks for sharing ❤.

[@Jovancostaa]

How long will these brake pads and rotors last

[@mrdinshaw]

Nice content

[@yaboirelish7708]

What if I don’t have pads? Like it’s just metal on metal

[@yoonfihnsaechao7202]

Where is your shop?

[@seabass22]

I used the impact on my slide pins and snapped the bolt off

[@enginbudak2894]

🙌

[@ryangisabum5576]

🙏💯