How to Replace Front Brakes 2010-2013 Ford Transit Connect

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS00907
This video shows you how to install front brake pads and rotors on your 2010-2013 Ford Transit Connect. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect
Tools you will need:
• Pry Bar 1aau.to/oJA/1AXAA00020
• 15mm Socket 1aau.to/oa6b/1AXAA00015
• 19mm Socket 1aau.to/o3N/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oaB/1AXAA00288
• Side Cutters
• Torque Wrench 1aau.to/oanM/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/oBC/1AXSS00048
• Safety Glasses 1aau.to/ovo/1AXAA00343
• 5mm Hex Socket
• Floor Jack 1aau.to/oRe/1AXAA00068
• Wheel Chocks
• Wire Brush 1aau.to/oqc/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@nathancross7436]

This is one of the best and well made videos explaining the entire process. You go the extra mile to make sure everything was lubed and torced correctly. Love it man.

[@declouxa]

Im back 5 months later. I really appreciate these videos. My ford transit connect needs love

[@wellsautodetail3864]

Awesome video! Extremely helpful, my brake job went smoothly thanks to y'all 🙏

[@declouxa]

woah bro this is epic but I donno if I can do it im such a rookie, thanks tho

[@guyin916]

thank you for this. laying out the tools needed... golden

[@philipmeyers5008]

very thorough video! Thanks

[@frankensteinke]

Thank You. Excellent video

[@jackmoorman5567]

Thank you for the video. Need to help my brother change his out tomorrow. God Bless.

[@JT-gq8wv]

Good Clear Instruction. Good Video Production. Thanks- I subscribed.

[@frankortolano5886]

Excellent video

[@aaronjensen3354]

That copper never seize seems like a better product then the paste. Where do you buy it?

[@user-is8oz6vy5r]

Now the brakes dont match the rim. lol

[@kyemaul18]

I didn’t like this video. You didn’t make a note of the top caliper bolt needing an extension to remove it. You have it on your gun. Without that you can’t get that bolt out