How to Replace Front Brakes 2011-2016 Hyundai Elantra

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@hungryowl1559]

I want to thank you guys. Because of you i did my rear calipers, rotors, and pads. Now i need to do my front brakes. You guys saved me hundreds! Thanks!

[@christophercharles3169]

Why bleed the brake line when it was totally sealed the whole time? I can understand if you were replacing the caliper but that wasn't done in this case. Am I missing something?

[@CSmith-gb1sl]

Shouldn't you have the reservoir cap off when compressing the piston?

[@Chris-4876]

50 foot pounds on those caliper guide pin bolts is wayyyy too much. Ask me how I know. It's more in the area of 20 ft lbs. Can you please edit the video to correct this.

[@burmesebeef]

no grease on the slide pins?

[@joehyundaitech7961]

dont forget to pump the brake pedal before putting it in gear I have seen this happen a few times where techs start the veh put it in reverse and press the gas pedal than they cant stop

[@dirtmover123]

Are the slide pins seized? I guess you don't know if you don't check them! It also looks like backing off that caliper piston is taking way more force than it should.

[@marcusaurelius7039]

23 ft/lbs on the guide pins. I maxxed at 33. 50ft/lbs is pushing it.

[@SusanBerard]

Torch for the caliper bolts is wrong, I broke two bolts trying to hit 50 ft lbs. Please fix this video. Otherwise the video is very good.

[@rainey82]

50lbs is likely too much. I just twisted my caliper bolt out of its threads.

[@webactivex1]

Already stripped out 2 new guide pins

[@MicBergsma]

Surprised you didn’t re grease the pins

[@cwanat69]

Easy to understand and to the point. Great video. Thanks.

[@geovanydelgadillo-dewitt1504]

How do I know if i need to replace the rotors

[@deepsupport11]

Thank you, this is so helpful

[@craz107]

Short and simple

[@erchupe]

Los tornillos que sujetan la pinza no los sacas y los limpias y los engrasas?? Vaya mecánico cutre yo no recomiendo

[@bornthataway]

Torque specs WAAAAY out of line. broke a caliper pin bolt. thanks for nothing.

[@jonathanhou8712]

Lol so many extra things you're doing.. 😅 So extra.