How To Replace Front Brakes 2014-2020 Nissan Rogue

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1APBR01290
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2014-2020 Nissan Rogue.
• Check here for more videos on the 2014-20 Nissan Rogue: kzbin.info/aero/PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ
This process should be similar on the following vehicles:
2014 Nissan Rogue
2015 Nissan Rogue
2016 Nissan Rogue
2017 Nissan Rogue
2018 Nissan Rogue
2019 Nissan Rogue
2020 Nissan Rogue
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/ocK/1AXAA00020
• Ratchet 1aau.to/omp/1AXAA00016
• Torque Wrench 1aau.to/ogF/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Floor Jack 1aau.to/ode/1AXAA00068
• Wheel Chocks
• Wire Brush 1aau.to/oaM/1AXAA00079
Subscribe: kzbin.info/door/WCdsftsTqYMO7cA_5Sc-yA
Check out our playlist:
Nissan Rogue 2nd Generation 2014-2020: kzbin.info/aero/PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@jimlongo1776]

The caliper slide pins are 14mm, the caliper bracket bolts are 19mm.

[@au123ful]

I’ve done this on so many cars but I always like watching a video on a car I haven’t done it on before. Plain and simple thank you!

[@georgecolby5157]

Excellent video, no wasted time turning the parts over & over this way and that. Thorough complete and brief.

[@bigsteven9116]

You could not have done any better on this video. I know nothing about cars and had no problem fixin it in 20 minutes

[@cheehoo684]

Torque specs 122 ft/lbs for caliper bolts 25 ft/lbs for slider bolts to caliper Wheels are 83ft/lbs for the lug nuts

[@davidbetzold2359]

One of the best instructors I have watched on the tube! Very knowledgeable and experienced! Easy to understand and to the point. Thank you!

[@franklynsmall7988]

This is amazing!! The precision is ridiculously impressive. Also, being detailed is really helpful. Thank you 🙏

[@scottkoole1964]

Very thorough and straightforward. No extra comments or unnecessary info. Thanks

[@TRQ]

+Scott Koole Thanks for watching our video!

[@costantinoamato]

Excellent content and thank you for sharing the torque values, a must for a serious job.

[@ritchieexcellent9643]

Hands down felt like you was right next to me talking me through this. Thank you.

[@lingxiao7285]

Great video. Short and clear. No time wasted.

[@drone6190]

Excellent video, all repair videos should be like this.

[@tm7208]

Great Video, I've done this before but I always like to refresh my memory. This is as clear and concise as possible.

[@totalbliss1]

Awesome videos. They are very helpful and great because you include the torque specs and proper cleaning and lube application. One thing though, by all means, please don't use red thread locker on bolts because it is permanent and requires heat to remove it. Blue threadlocker is what should be used on anything that would require subsequent maintenance but would still require a firm hold.

[@craignelsen3740]

Dude, awesome job. Straight up no bs. Quick, slick & sick

[@SaidAttalah]

This is what I call Perfection! Thanks for sharing.

[@LL-fb8wz]

Perfect presentation without the fluff.

[@glennsampayan2322]

Thanks for this helpful video. Now I can use it for my Nissan Rogue.

[@pineapplelady7662]

This bloke is very good at his job, very informative, thanks :)

[@jasonrussell2906]

Great video, very well done.. Would be good to mention if the front and back are exactly the same. Thanks

[@BillSW]

excellent video. well explained and very thorough.

[@timepieceobsession6602]

Nice video, appreciate the torque specs.

[@macduff1956]

Well done ! You should explain more and show how the springs works with the pads.

[@PillCozbee]

Very thorough. Great video.

[@goldenottawa]

Very professional video, thank you

[@abyields7831]

Excellent video, thank you 🙏

[@hectorfigueira656]

Excellent Video , nice Job

[@lucasruckle]

Awesome!!! Well done, thorough and concise. Thank you for the upload!

[@TRQ]

+Lucas Ruckle Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@CHUCHO7113]

THANK YOU , YOU ARE THE BEST !!!!!!!

[@DAINGUYEN-zh9lc]

Thank for the tuition

[@Perceptive.Moment]

I changed my own pads today, it had no springs on the clip things when I first looked 👀 I noticed but idk the consequences of that, but i put new hardware on that had everything but i was thinking like why tf does it not have any to begin with? Idk if the shop i went to took them off or wtf because they should have informed me or sumn i would imagine, but i fixed it myself thanks to this video and also some help from my mom to be there to watch make sure i did things right and safe, it was a very fun “ tiring “ learning experience i will remember it forever!!! Cant wait to turn my 2016 Nissan rogue S into a rally racing car I definitely need new ball joints tho 😢 but all in due time!! Happy learning yall!!!

[@404notfound.....]

That's the proper way to do a break job and not a "pad slap". But good luck trying to get any garage to do it this way, they simply will not do it.

[@tylerc7037]

Great video.

[@TroubadourJuggernaut]

if its a 2019 or 2020 it is likely to have the electronic parking brake assist attached to the caliber, scan tool is needed to put the brakes into "service mode"

[@neilchristie6013]

Very good - thanks. One comment - in the intro - he SAYS "replace wheel bearings"

[@davidkan5469]

Great video...tks!

[@Troy_Sent_A_Message]

First video I've seen that looks like the job was done right.

[@franklynsmall7988]

Hooky-Do 😂 love it 👍

[@nicholashernandez9324]

How can I get torque specs for a 2020 rogue without a Haynes ? I hear the Haynes manual is outdated. It looks as if they only changed 2008-2015 on the front cover to 2008-2020.

[@andrewdoble9952]

Do the clips for the brake pads need to go on a specific side or are they the same size for the top and bottom that sit in the groove of the bracket that hold the pads in place?

[@andygold]

Do the pad separation springs slip into holes in the pads, or are they just sitting behind the pads' tabs?

[@walt2727]

Nice video. I guess there's no need to bleed the brakes?

[@jackychen7423]

What’s torque specifications Benjo bolt from Brake line to the caliper! Thank you

[@byrdlandTV]

Video was pretty good but never a mention of what size socket was used for the slider bolts nor the caliper bracket bolts. 🤔.

[@franklynsmall7988]

I love it

[@kinga4934]

Is this the same method for a 2020 Nissan Rogue

[@chrisfrank8413]

Nice, But why Red thread lock? That's for permanent installs?

[@Pingaheimer]

that's for if you have badass air impact guns when u go to service the brakes again lol.

[@goofyfuhh5877]

Will u please ad a list of tools needed and also all the lubed and lockers u used

[@tlazur]

Can I use sil glide on the pins?

[@deebee3901]

Why did you not install disc retaining screw?

[@johnmorris5026]

I have a Rogue SL. Is it the same for that model as well? It looks easy. Is it really that easy?

[@TRQ]

+John Morris The installation for the model should be very similar.

[@johnmorris5026]

@@TRQ It certainly seems straight forward. It’s easy enough. Question: Re-pressurizing the brakes. Any bleeding needing to be done? Or simply pumping the brakes to reset them?

[@hoselrocket2001]

I don't think the squealers are installed???

[@venomrogue1]

Never use normal brake grease for the pins. White lithium grease only!

[@colbyloveland714]

Why’s that?

[@abim3365]

nope silicon grease , white lithium grease metal based

[@SrangeBrainGames]

Instructions absolutely clear but my brakes fell off please help

[@jackychen7423]

Add subtitles in the video more better

[@JoseMaldonado-dy1cy]

Paint those calipers!

[@Madisonkdub]

YOU ARE ANOTHER ONE, DID YOU NOT NOTICE THE CLIPS YOU INSTALLED ARE DIFFERENT THEN THE ONES YOU TOOK OFF?

[@mafatchu569]

Ekspecially? Oh brother

[@zgreen6604]

Those brake pads looked like they had life on them to me, am I crazy or maybe just didn't see right?

[@INOURDOGHOUSE]

I thought this video was how to change the brake pads NOT the bearings.

[@swooster2011]

If you watch the video you’ll see that he does change the brake pads and rotors.

[@Alderauth2463]

The title doesn’t match the video

[@rafars2246]

Scary to see videos to be so wrong lol Good luck with you brakes if you use lubricant where anti seize is required....

[@marquez1876]

Gotta love not knowing what size bolts

[@tinaa.2371]

🤷🏽‍♀️now I know why they charge so much😒😢

[@chrisfrank8413]

They overcharge, and never give a refund if the job takes less time.

[@UnkleGaga]

While you explain what to do you never tell us what size sockets to use. So this is a waste of time.

[@davidschweinhagen2145]

Terrible video! No socket sizes at all!

[@jackychen7423]

What’s torque specifications Benjo bolt from Brake line to the caliper! Thank you