How to replace front brakes on toyota corolla 2003-2007

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic
#toyotafrontbrakes #bestbrakejob #howtodobrakesandrotorsoncorolla #toyota #corolla #toyotacorolla

[@brentphillips4106]

Thanks bro! I liked how In depth you were and still done it quickly. The camera slowed ya down. I bet you could've done both sides in less than 16:08, if you didn't have to film the process for us to watch & learn LOL. I'm now subscribed. Thanks again

[@RBTheMechanic]

Gear no problem and good job doing it urself

[@newera4k333]

Used this video to successfully do the front brake, rotor, pads, caliper on my 2007 carolla. Hardest part was getting the rotor off. Both were very rusted on. Had to hammer it off with a sledge. Took an hour on the first rotor. When in doubt. Keep hammering

[@RBTheMechanic]

Nice job!!!

[@msnod3]

Next time get a puller

[@forhisglory700]

Thanks for mentioning the filing of the pads. I had a difficult time placing the new pads due to the angle of the rotor and limited view. I was working on it at home. I still haven't finished the job. I'll have to finish it tomorrow. Not looking forward to the other pads; however I have new information to assist me with the process. Thanks.

[@RBTheMechanic]

Yeah no problem glad u did it urself!! I always file if they don’t fit like butter

[@forhisglory700]

@@RBTheMechanic Thanks for the reply. I finished the work on the car; and I applied exactly what you recommended in your video and it worked perfectly; without struggling to get it in. Like you said, "it went in like butter". Thanks again; and God bless you.

[@RBTheMechanic]

@@forhisglory700 no problem!! Thank you for blessings!!

[@TheTonyRedgrave]

Thank you so much man. Even though I used to do this with my dad, there was some little stuff that I just couldn't remember well and you explained it all perfect.

[@RBTheMechanic]

Thanks!! Yup this video will help lot to anyone who want to do brakes on their corolla

[@nathanielcm]

Great informative video. This was much appreciated.

[@RBTheMechanic]

Glad it was helpful!

[@rsmith7292]

Great instructions, thank you!

[@RBTheMechanic]

Thank you

[@Diecast_Alliance]

About to do this in the near future. Appreciate the thorough video.

[@RBTheMechanic]

Glad it was helpful! Good luck when u do it!!

[@oscarrodriguez2633]

Thank you man this video help me a lot 👍👍

[@RBTheMechanic]

Glad it helped

[@jmillz674]

Thanks for the help brotha! ✌️

[@RBTheMechanic]

No problem 👍

[@jmpicturefly]

thanks for the video. helped out a lot. and yes it was serious Hammer time!

[@RBTheMechanic]

Yuppp

[@p.h.1576]

Great video. Thanks.

[@RBTheMechanic]

Thank u

[@splattykidsart]

Thanks so much for this vid! Doing my own brake pads

[@RBTheMechanic]

Welcome let me know how it goes make sure u double check all of ur work and bolts and pump the brake peddle once’s all is complete before u start the car

[@splattykidsart]

@@RBTheMechanic Noted, Thanks so much for the advice.

[@rodolfoandinoponce4718]

Nice video bro thanks olot for u time

[@RBTheMechanic]

I problem

[@michelangelolealcala8036]

Great video thanks

[@RBTheMechanic]

No problem 👍

[@Derek8487]

Nice tip about filing the rust off. I own the same car thinking about doing my own brakes next time they're due.

[@RBTheMechanic]

Cool I will be doing another videos on one heck of best brake job with super detail greasing info and type of greasing to use and why to use soon keep watching my friend... thank you please subscribe also subscribe to my other channel here’s a link kzbin.info/door/vqsPzqAZfVv_gjBYUFqNdg

[@Chris-vp2vk]

Great video

[@RBTheMechanic]

Yup thank u

[@alexcorrea8103]

Corolla king

[@ro-landocalrissian4633]

Do you recommend any particular brand of brakes & rotors & are there any brands we should stay away from?

[@RBTheMechanic]

I try to stick with power stop they don’t Squak and I don’t go against any brake company I do stay away from Wagner they always squeaked on me

[@aaron.umbarger]

Thanks for the video, where do you look up the torque specs?

[@RBTheMechanic]

On my all data or mitch shop key

[@epicbullet497]

I'm sure it's an obvious question, but is it possible to put the guide pins on backwards on these types of brakes? I ask because I have a '02 Accord as well and the orientation of the guide pins matter a lot because of the rubber on the tip. So I just wanted to double check

[@RBTheMechanic]

It dose matter but it shouldn’t effect I have seen brake run good and well with pins on diffrent bore than originally it was in

[@hectorromero3536]

What lube did you use on the hub before you put on the rotor was it a certain brand or type?

[@RBTheMechanic]

Regular brake grease u can use any grease

[@Freshboymigz]

@@RBTheMechanic so you use brake grease on everything?,

[@RBTheMechanic]

@@Freshboymigz yes

[@user-ee4ji8pf3k]

Question. Do you have to purge the system by removing the brake line nut, pump the brake padel and open and close the port. It's that something that needs to be done after replacing the brake pads and rotors?

[@RBTheMechanic]

U mean bleeding !! No u don’t need to do that. But make sure u pump the peddle 4-5 times once’s job is completed before u start the car peddle should get nice and hard

[@user-ee4ji8pf3k]

@@RBTheMechanic my bad. I was taking about when you replaced the rear breaks. (The drum type) I''m not talking about bleeding. But just letting a little brake fluid pump out the brake line to get rid of any air. My pops says I'm supposed to do that but I don't understand the logic behind that.

[@theofficialbigjoeshow]

🙏💯👊🏼

[@anmolv3178]

What's the name of the lube u used?

[@RBTheMechanic]

Brake lube grease here’s video on that kzbin.info/www/bejne/qXzVdWuIpNaFp80&feature=sharea

[@alexbittner9649]

What is the grease you use?

[@RBTheMechanic]

Alex Bittner high temp brake grease u can just got to Autozone there one called silicon brake grease

[@alexbittner9649]

Thanks Great videos...

[@LuisyFBaby]

I’m looking forward to doing my breaks now 😂 I think they might be down to the metal 😓

[@RBTheMechanic]

Oh yeah brake and rotors watch my liberation tips video use it when u do the brakes

[@macc240038]

Locktite silver on Amazon is $- 8.99

[@alanchanthavisouk8557]

When doing front and rear. Do I pump the brake pedal after I completed the front or after the front and rear is completed?

[@RBTheMechanic]

alan Chanthavisouk u can do both then pump it that’s how I do it

[@patrickinnocent3961]

I want to what you do when you push the brake

[@alanchanthavisouk8557]

@@patrickinnocent3961 after u finished pumping your brakes just go out for a test drive

[@mauriciocoura4167]

What is the torque specs for both bolts please??

[@RBTheMechanic]

Sorry for late reply but it’s 25 and 79 ft lb

[@mauriciocoura4167]

@@RBTheMechanic another mechanic feommanother channel said it’s 65. Where did you get that information please?

[@RBTheMechanic]

@@mauriciocoura4167 alldata what yeah is ur car I can double check tomorrow

[@elsanto8505]

@@mauriciocoura4167 RB The Mechanic is right (25 and 79 ft/lb.) Check here toyota-specs.com/cars/2003/corolla1.8/torque-specs_brake.php

[@harpomarx7777]

Get a TRIPOD!

[@reynaldogonzalez8209]

What about the torque?

[@RBTheMechanic]

Got them on my new videos !!

[@RBTheMechanic]

If u need specific vehicle send me year make model I’ll let u know

[@amytrantham9742]

hey where are you located??

[@RBTheMechanic]

North NJ bayonne