√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@RH-sf7lk Жыл бұрын
Like all of the A1 Auto DIY videos, this one was very helpful. I wanted to upgrade the fog lights on my daughter's 2007 to LEDs. What I found is that you can easily access them by following this tutorial without removing the bottom snap fasters or the 10mm bolts on each side. Just remove the top radiator cover as shown and the snap fasteners and phillips screws in the wheel wells. Then pull out at each side as shown and you'll be able to easily reach the fog lights.
@simotronic3 жыл бұрын
Very clear explanation - I have to reattach the bumper on our CR-V and the video is useful to show how the parts interlock. Thank You!
@markeyfarrell2 жыл бұрын
those two 10mm bumper bolts 2:48 ... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
@chriscoughlin16915 жыл бұрын
Excellent video - my 2008 CR-V LX was slightly different. No screws on the underside at the ends ( the ones you sprayed ) they were push clips. Also the license plate bracket may need to come off if attached. In NJ we have to display front and rear plates. It did take longer than 9 minutes though LOL Thanks for the videos
@lect0n7 Жыл бұрын
I’m watching this because I was driving home from the gym tonight (November, 2023) & a deer ran right out in front of my car, I hardly got a look at him, because he hit the ground, sprung back to his feet, and ran right back into the woods where he came out of… so I stopped at a supermarket, and the front bumper of my 2011 Honda CR-V was a little bit separated, but this video shows me basically everything I need to know to fix it…
@williamchiong6582 Жыл бұрын
Good day. I have a question. The bumper of my CR-V 2010 hit something upfront, causing the upper corners to dislocate and misaligned a bit, about 10 mm from the car's external surface. Can I just push it straight back to align it? I am worried that if I push it straight, I might break something.
@RafahCCАй бұрын
Great Job! very useful !
@asepnkn8268 Жыл бұрын
What is the total number of brackets on the front body of the crv gen 3... Thank you, brothers and sister
@karlajemima5 жыл бұрын
what are the features of an original bumper , does it have a Honda logo on it or a part number
@edgarokras56954 жыл бұрын
Original has a part number at the back but sometimes aftermarket has it too. Ofcourse aftermarket use different quality plastic. Very rear that aftermarket better than original but usually a lot cheaper.
@Bolek_i_Lolek3 жыл бұрын
Removing bumper without headlight washer jet is quite easy - but how to remove bumper with washer jets? Washers in Honda CR-V III are mounted to the bumper with two screws each. Are you able to prepare video guide how to remove/replace front bumper equipped with headlight washer jets?
@1AAuto3 жыл бұрын
+Marcin We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
@1AAuto3 жыл бұрын
+Marcin Thanks for the tip! We'll pass this info along to our production team.
@Zulu8233 жыл бұрын
Same problem here!
@shaunreilly56322 жыл бұрын
Does the grill and the part with the logo unscrew from the bumper? My bumper is broken but those parts are ok, wondering if I can transfer them to the new bumper.
@andyjohnson37902 жыл бұрын
Almost exactly what you are explaining happened to me just last week. I bought some JB plastic weld for about $7 and glued the two pieces back together.
@lisaburke477910 ай бұрын
is there a video for the rear bumper? The rear bumper on my CRV has a softball size dent and I can't figure out how to push it back out?
@1AAuto10 ай бұрын
+@lisaburke4779 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
@iexistkek9 ай бұрын
Hide your chipmunks when this guy's in town
@cambridge68404 жыл бұрын
I need to replace a broken bumper on this car which parts do I need? I think there are 3 main pieces anything else I need? Thanks
@mr_delivery5 жыл бұрын
It is an awesome channel it helped me in many ways with my cr v
@1AAuto5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +BiBiN DaS
@gercho1991 Жыл бұрын
what if you have a radar under the honda emblem?
@wandatubbs5603 Жыл бұрын
We have installed a base plate to fir a stowbar, when replacing the bumper it’s hitting something and won’t go back in place..
@valerierondone36054 жыл бұрын
Did you paint the new bumper before installing it
@1AAuto4 жыл бұрын
+Valerie Rondone Thanks for watching! We just reused the original bumper in this video as this was just a demonstration. It is best to paint the bumper off the vehicle if you get a new one, as it is more work to paint after it has been installed!
@bukkymaxwell75885 жыл бұрын
Please can i upgrade my Honda CR-V 2008 front bumper and grill kits to 2010 Honda Crv bumper and front grill?????
@1AAuto5 жыл бұрын
Hello, Thank you for contacting us! We cannot recommend a grille or bumper kit for you as we do not carry that part, and without knowing the specifics we cannot guarantee the parts you are looking at will fit. Please let us know if you have any further questions. +bukky maxwell
@-rudy-3 жыл бұрын
The hood is different on the 2007-2009 vs. 2010-2011.
@sistercalhoun44443 жыл бұрын
Is a 2008 Honda CRV front Bumper compatible with a 2010 Honda CRV EXL ?
@markeyfarrell2 жыл бұрын
should be very same if not exactly... is the 3rd generation model from 2007 to 2011
@Zulu8233 жыл бұрын
What can I do if one bolt under the bumper broke in 2?
@richardrichard54093 жыл бұрын
Cry
@itoburrito91512 жыл бұрын
@@richardrichard5409 LMAO
@menglis34 жыл бұрын
Those two bolts under the bumper....
@markeyfarrell2 жыл бұрын
yeah, no kidding... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
@rockj1125 жыл бұрын
I noticed you change the headlights
@leninlopez55646 жыл бұрын
Que tal, puedes mostrar como se cambia la bomba de limpiaparabrisas del la honda crv 2008 o 2009, gracias.
@melisatome66866 жыл бұрын
es facil podes remober el babero de la rueda dereche acompañante y esta aabajo la bomba es un cilindro del tamaño de una pila si es que no queres saacar todo el paragolpes saludos
@allyzatheravenclaw39154 жыл бұрын
How much will it cost for the new bumper
@1AAuto4 жыл бұрын
+Allyza the Ravenclaw We wouldn't be able to say here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
@Model_Car3 жыл бұрын
👍👍👍
@maryamevermore3 жыл бұрын
Nifty
@1AAuto3 жыл бұрын
+Knight Templar Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c