How to remove your 2007-2011 Honda CR-V Fender

Hello folks! Learn how to remove your Honda CR-V fender with great detail and only a few tools. We want you to save time and money!
Where to purchase: bit.ly/7-11CR-VFender
Source: www.revemoto.com
0:00 Start
0:16 Assessing the damage
0:55 Fender liner removal
5:31 Bumper separation to expose the bracket bolt
7:40 Rocker panel removal
8:48 Lower fender bolt removal (behind the rocker panel)
9:18 Taping the door for safety (not necessary)
10:13 Top corner fender bolts
11:42 Fender bolts under the hood
13:22 Lower fender bolt (from the bumper separation)
14:03 Fender Removal
Thank you for stopping by to watch your video on how to remove your 2007-2011 Honda CR-V fender. This was a pretty quick job but man, there were so many clips on that fender liner. We're not complaining because Honda vehicles are some of the easiest to work on.
TOOLS NEEDED:
You will need a Philips screwdriver, a flat-head screwdriver, or a panel clip removal tool, and a 10mm wrench or socket wrench.
THE PROCESS:
This is a very quick removal video for us. We did things a little differently and just went straight to the removal process. The fender liner has quite a few plastic push-pins and it's a lot easier to use a panel clip removal tool. We used a flat-head screwdriver and it did the trick. You have to pry the clip up and pop it out. Repeat this step with all the clips around on the fender liner.
You also have to remove the front end of the bumper. There is a bolt on the very corner of the fender on the front. You don't have to remove the entire bumper, you just have to separate the corner. We recommend that you take the bolt off at this point, but for some reason, we waited. You also have to take off the rocker molding panel to get to the bottom fender bolt. Luckily, the rocker panel has 2 pieces, and you can only remove the small part to expose the bolt. Next, we moved to the top bolts. These are very easy to get to but they are near the windshield cowl and between the door and the fender. Lastly, there are about 3 to 4 fender bolts under the hood. You do have to remove the plastic panel but it's only held on by a couple push-pins.
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
_____________________________________
#honda #cr-v #hondacrv #DIY #revemoto #paintedautoparts #HowTo #hondacars
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@Nightfall4.3]

Thanks so much for this video, the only one I could find and really needed it. I also really appreciate that you use tools that any average person would have.

[@ReveMoto]

Glad it was helpful. We've watched so many of these in the past and we never had the special shop tools. It's cool to finally see someone appreciate that!

[@samueltheweber]

Thanks for making this video, the quarter panel on my crv was (of course) damaged and your tutorial helped me remove it.

[@ReveMoto]

Glad it helped and thank you for watching!

[@JeovannyTovar]

I second the comments appreciating the use of basic tools to get the job done. I’m willing to bet most people who watch these videos are NOT professionals but DIYers looking for guidance. As I’m going around getting quotes of $1k and up for a fender bender, now I’m looking to replace it myself. Thanks for the video!!

[@ReveMoto]

Thank you. Yes we try to cater to the everyday DIY that doesn’t have the finance or need to get power tools . Plus it saves you a lot of money doing it yourself. If you need parts for you car go to www.ReveMoto.com

[@samr.1073]

Did you end up being able to replace it yourself?

[@JeovannyTovar]

@@samr.1073 I did! 2x since watching this video 😅. First time I did it just like the video but the second time around I took the wheel off since I was also removing the inner liner.

[@ReveMoto]

Thank you for watching our Honda CR-V tutorial video. Let us know in the comments if you want to see more! Where to purchase: bit.ly/7-11CR-VFender Source: www.revemoto.com

[@markpolomski5623]

Love the rat's / squirrels nest on the tire. Leave a car sitting - anything can move in!

[@ReveMoto]

:) Hello and yes, We'd wish folks would take better care of their cars. Thank you for watching!

[@davidbrandel1311]

Would it make the job easier to remove the tire?

[@ReveMoto]

I recommend just rotating the tire. More work to remove tire. Go to www.ReveMoto.com for this fender

[@user-vf3oh8jy7n]

The size of the socket i need please

[@ReveMoto]

It's a 10mm :) If you need any parts for your car go to www.ReveMoto.com

[@patjohnson979]

Rear fender

[@ReveMoto]

Hey Pat - did you need the rear fender? That's a welded part of the entire frame/car so usually customers just get it fixed and not replaced

[@joesparrow3869]

Pretty good tutorial but you need to invest in some better tools why are you not using cordless impacts ?

[@ReveMoto]

Hello Joe! We do have an impact gun and we've used it on some videos. We like to use basic tools. Also, the battery pack get used around, so it's not always available. Thank you for watching!

[@joesparrow3869]

Get the right tool to remove those plastic rivets seriously man

[@ReveMoto]

Hey Joe! When we started making these videos, we realized we didn't have this tool, so we bought a set. Then we realized not everyone will have this tool or need it. We'll use it in some video's and in others, we'll use a flat-head screwdriver. We try and use the same tools an average person would have in their garage. Thanks again for watching!

[@khodayehrangekaman315]

🫵🫶🫶🫶👌🙏your awesome work thank you sir

[@ReveMoto]

Thank you so much. Love the complement