How To Replace Front Bumper Cover 04-07 Honda Accord

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/59/u/...
1A Auto shows you how to remove or replace the front bumper cover on your vehicle. This video applies to the Honda Accord, years 04, 05, 06, and 07.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o9u/1AX...
• Phillips Head Screwdriver 1aau.to/o9u/1AX...
• 10mm Wrench 1aau.to/onA/1AX...
• 10mm Socket 1aau.to/oPY/1AX...
• Ratchet 1aau.to/oaa4/1A...
For More Info visit us at 1aau.to/h/aZx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@rvb9256]

Thank you sir. Replaced my 07 accord bumper this morning with a pre-painted, shipped to me. saved hundreds took an hour by myself. i had fun. followed you and it was easy...much thanks.

[@joellhommedieu6056]

R VB what link did you use to purchase the bumper? Looking to replace my 03 accord's

[@AndresGarcia-rd3mq]

Where did you get your pre painted bumper from ? Im going though the same thing and not sure where to order it from

[@croplaya]

I'm in the same exact boat. I am getting it shipped prepainted. 2007 Honda accord front bumper with fender liner and bracket. Was it hard to do?

[@mariolevicy5467]

Where did you get the bumper from

[@punxwookie]

This was a first in my own car repair I replaced a damaged bumper from a hit and run. I am glad the grill was taken off because I needed to take everything out on the damaged one. Long story short this video helped me save 200$ thanks man I really appreciate this and it helped allot!!!!

[@1AAuto]

@Mabus71 Find an automotive parts store with a good paint department. They will need your paint code, then they can mix some paint and put it in an air charged can for you. You can paint it yourself.

[@ifrancus9623]

Good detail and clear instructions. Without the ego trip of some other repair guys!

[@1AAuto]

We currently do not have a video that shows this type of repair. Well keep this request in mind in the event that we need to make this repair in the future. 1aauto.com 888-844-3393

[@1AAuto]

You will want to get the OEM clips to get them locked in correctly. Normally they either forget the clips altogether or they are damaged and unusable when the bumpers are removed.

[@1AAuto]

@tucsonautodetailing Thank you for checking us out.

[@mack93936]

Thanks for the video clear and to the point, just what I was looking for, brought a car with a damaged front bumper .

[@reggiedennis5331]

Just watched this. Helped a ton. Got it done. Blessings to you, my friend.

[@1AAuto]

@naldo1212 If they didn't change the way that it mounts to the frame, it should.

[@LaylaAdawieh]

wow good job 1aauto. You don't find that much of people in america tutoring for free.

[@1AAuto]

@507karry Thank you for visiting our auto repair channel on KZbin. Have a great day!

[@1AAuto]

Many of them are different on the way that they are fastened to the front of the car.

[@SergioSanchez-tu4zy]

You the goat bro I’m trying to buy a new bumper but this also helps incase I sell the car and put the old bumper back

[@1AAuto]

@gaivoron They may be the same style. If you go to the dealer they'll be able to tell you exactly what was there from the factory.

[@1AAuto]

You may be able to if you can access them. 1aauto.com 888-844-3393

[@ItsSpeirs]

What is the name of the black panel just under the front bumber?

[@UnrelatedNonsense]

Thanks for the tips I want to replace the stock grill with an aluminum mesh grill, hopefully this helps.

[@1AAuto]

Thanks for watching. Have a great day! 1aauto.com 888-844-3393

[@dianeharrison8144]

is the same installation for a 2003 honda accord coupe

[@1AAuto]

@mterui I am not sure what Honda would call it probably some type of panel, a 'closeout panel' 'trim panel' 'deflector' maybe.

[@1AAuto]

Thanks for watching. Have a great day!

[@1AAuto]

The mounting points and body lines may not like up correctly. 1aauto.com 888-844-3393

[@slydaxpoker5646]

Damn wish I can do it as easy as you make it look😣

[@TheRisky9]

You just saved me $1000 and an insurance claim. Thank you so much!

[@1AAuto]

+TheRisky9 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@1AAuto]

It could if all of the body lines and mounting points are the same. 1aauto.com 888-844-3393

[@Leto_at]

How much would it cost to paint a primered replacement front bumper cover? My 2003 Honda Accord Sedan has some front bumper damage from hitting a snowbank, and I need to replace my bumper. I saw a replacement one online for like 160 bux but it says its primered and my car is silver? Is the best scenario to buy that one and get it painted or what is the best possible and cheapest solution?

[@baitshopboy]

Great video! I dont have a lift and am planning on jacking the car up and put on jack stands. I'm going to use a hydraulic floor jack for the first time. Where on the car should I place the jack and jack stands?

[@lupemadrigal3541]

how many clips are on it and what type? how many screws and what size are they?

[@1AAuto]

@ifba100 They may be pretty close.

[@mariorodriguez9685]

Best videos everytime

[@1AAuto]

It looks like it clips to the fender in the video.

[@brenttaj7573]

3:38 Whoops!!😂

[@losxlakers]

Really nice video!

[@shawnosborn3712]

Sure would have liked an up close of the pins holding the grill and bumper cover together.

[@1AAuto]

+Shawn Osborn Thanks for the feedback!

[@estevan007]

Can you guys make a video where you remove and replace a radiator support core on this same type of vehicle? That's my wish anyway. Thank you guys for your videos!

[@1AAuto]

Thanks for watching. We'll keep this request in mind in the event that we need to make this repair in the future.

[@estevan007]

1A Auto Parts Awesome! u guys are great!

[@kareezer]

thanks so much for the videos, extremely helpful! I'm curious I wanted to install an aftermarket bumper from duraflex myself. would the process be the same as the way you reinstalled the stock bumper cover? Thanks again!

[@VishnuVardhan-ds1vd]

thank you very much..its very full to me...

[@1AAuto]

+Vishnu Vardhan Thanks for checking us out!

[@gtubgle]

Thanks guys, great video.

[@haitianstylz]

thank you for the video ..

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@michaelmoon1229]

thank you so much for this.....much appreciated

[@1AAuto]

+Michael Blackmooon Thanks for checking us out! 1AAuto.com

[@dctrdrp455]

I gotta mesh grill comin in... thanks for this vid

[@1AAuto]

+DCTR DR!P Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@jimkelley5812]

Can you please do a video on removing the rebar for this style Accord? Thanks!

[@1AAuto]

The 2003 may be different.

[@bigbama598]

The four bolts on the bottom: what are they bolting to? I just put a new bumper cover on, and there's nothing above the plastic bumper cover for the bolts to screw into.

[@beverleysmith6050]

Fantastic - thank you so much!

[@jagfull]

Thank you

[@1AAuto]

+Zulnoon V Thank you!

[@Truqueenn]

Can I put fog light on a 2005 sedan with no hole on the bumper for fog lights

[@1AAuto]

+Catherine Almanzar Thank you for checking us out. This would be do-able however modifications and extra wiring is required. 1aauto.com

[@GoldenSunz22]

thanks for video...we get a lot of cars where bumper isnt clipped by wheel well and headlight . any simple solution to that ? we get cars from body shop like that a lot

[@cakeruss1]

Thanks for ur video.

[@NiNjaTurtLe697]

THANKS!

[@gaivoron]

thanks man. i got a problem i bought an 07 accord and i noticed that the grill that you accidentally popped off is loose from the bottom on my car, and i cant see any clips on the bottom. can you tell me if those clips are same ones on the top?

[@benbambino7018]

Is it the same process for the coupe version

[@TechCrazy]

Fixed camera for this procedure is not helping.

[@DatDudeDrey]

I know this may sound stupid, but if I needed to order one off line is it actually called a bumper cover instead of just front bumper? Scared to order the wrong part

[@1AAuto]

+DatDudeDrey Thanks for watching! The technical term for that would be a "bumper cover." Most retailers will have it listed that way! 1aauto.com

[@jesusgutierrez1827]

DatDudeDrey same here been going on the website for a couple days got every single part but the bumper lol...

[@Scatpack23]

Half my bumper ripped off along with my driver side fender lining so I'm juat gonna remove it , what's that box on the driver side under the bumper looks like something for the air ?? Cause where it goes bolted is broken as well

[@willbermudez2386]

I dont know if you still answer this questions but my question is (relative obiusly but idk) the front bumper of a honda accord sedan 2004 is the same that a 2dr accord 2004? Its because í want to add frog lights on my car and i have to change all the bumper because í dont have the holes

[@1AAuto]

+Will Bermudez Thanks for watching, Will! We did some checking and it does look like the front bumpers will differ on a coupe than a sedan. 1aauto.com

[@TheArimari08]

Will Bermudez nahhh I have both the 4drand 2dr.the four door fog lights are different from the 2 dr. If you look on eBay there are different types of fogs for these cars based on the bumper design.just depends on the look you are going for.

[@jspallin]

Appreciate the video

[@tonytruong3060]

the bumper phillips screws in the wheel well can't go in. The front bumper doesn't line up with the other holes so I can't screw it in...

[@SP-ig3vs]

Can you please tell me what the black plastic thing with two circulars in front of your radiator is called?

[@pattycat100567]

excellent vid/

[@1AAuto]

Thanks for watching. We're glad you liked it. 1aauto.com?KZbin&CTA%20Comment&ATony 866-403-3393

[@elmarito007]

Theres a way you can make a video about how to replace a fender in this kind of car, please?

[@NYC1CAD]

do you have a video for the front bumper cover replacement for a Honda Civic 2007?

[@croplaya]

Can I do this myself if I need bumper and RF fender liner and retainer?

[@gaivoron]

@1aauto ok thanks

[@boletusam2gaming]

At the 4:07 mark: what's the part called beneath the headlight (behind bumper cover)?

[@IbrahimSaheed-xl5cf]

Recent engine

[@NRainharris]

What is the black cover called you put on last. Need to purchase one

[@chevroxy]

thanks for tht video.

[@randallchaimbrone9473]

Thanks for posting.where can I order this exact bumper,2004 honda accord ex 4 door,

[@rusta1975]

The clip that you lift up at 3:03, on the bracket. What is that bracket called? Need a replacement in my 05 honda accord. Thank You

[@joseamuro320]

Como se quita el foco de luz de la placa honda Accord V6 2003

[@stulaganov]

I've got question: can I use Accord 2006-2007 front bumper on Accord 2003-2005? Thank you for answer in advance.

[@MrMoza91]

yes you can.

[@lapepona8502]

Hey can my 03 Honda fit a 05 front bumper ?

[@xKuroshi]

Hey 1A Auto, i was wondering if maybe a coupe bumper would fit on a LX Sedan, i wanted to get some fog lights for my car but the bumper doesn't have it. So i was wondering if maybe a EX coupe bumper can fit in a LX Sedan without a problem or slight adjustments

[@1AAuto]

Thank you for stopping by. This isn't something that we have tried, the mounting points may be different. You may want to join an automotive forum for your vehicle and ask some of the members what might be involved in attaching the different bumper to your vehicle. Hope this helps you out. 1aauto.com 888-844-3393

[@ShadowG72]

'Preciate the vid, just changed mine, 04 Accord LX. Took much longer than I expected, those pesky clips...easy day tho!

[@1AAuto]

Thanks for checking us out! 1aauto.com +Sean Evans

[@cristiana9529]

hey do you know where i can buy those clips if i lost them

[@Scatpack23]

My bumper ripped going 125mph and was dragging tonight I'm just gonna take it off and leave it off for awhile

[@DJAmovement]

Most of my bumper clips are broken can I still do a replacement?

[@1AAuto]

+Andres Movement You should be able to get replacement clips from your local dealer. Hope this helps you out. 1aauto.com

[@BennyB00per]

yes, you can... but I highly recommend that you should probably buy some new ones for safety! Otherwise it could loosen up (from potholes or heat) and fall off causing you or others to have an accident!

[@IbrahimSaheed-xl5cf]

How to reset timing

[@IVANBARCA10]

is the bumper cover a actual bumper like can i use it as it actuall bumper

[@BrandonWilliams-ft5ow]

Will a 2001 front end fenders bumper and hood fit a 07 Honda accord

[@1AAuto]

+Brandon Williams No they will not fit a 2007 model.

[@cesarchim940]

Gracias sólo falta en español

[@1AAuto]

+Cesar chim De nada. Gracias por echarle un vistazo. 1aauto.com

[@WhatsInaName68]

What if all the stuff under bumper got ripped out? How do you find those parts

[@1AAuto]

+NYFB Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@Cityboi504]

How to take out the fog light covers ?

[@fholiday]

Big question I need to have the left rear side of this car replaced. 2004 Honda accord coupe. I'm looking for the body panel that extends from the roofline to the left rear quarter panel. It's all one piece, I assume. I don't know what to search, and I can't find it online anywhere. Can someone please help me?

[@1AAuto]

+fholiday Thanks for watching! That section is generally referred to as a quarter panel. On your application you can try to search by "rear driver side body panel" too, that might help! 1aauto.com

[@Craftasticalness]

What is the black plastic tank on the left side of the car underneath where the bumper was?

[@afterdark6822]

Part of the air intake.

[@jayfeezy9715]

Hit a damn dog it was raining hard could barely see the lines on the road either I was gone swerve into the opposite oncoming traffic or swerve into a rail so I had no choice but to hit him I hope he survived but I don’t really think he did from that impact so yeah I’m here because I need a bumper

[@oldmandave8976]

is the process about the same.for an 8th gen?

[@1AAuto]

+David Brautman It might be a different procedure on that vehicle. 1aauto.com

[@samidpersia9832]

Where can I order the front bumper?

[@malachibushey9327]

At 8:33 in, what’s the name of the black piece that you’re putting under the bumper?

[@nunyabusiness5075]

Front engine splash guard, or engine splash shield.

[@itsjustrenee1320]

I'm an old lady. I don't think I can do this myself. Would someone please tell me what I should expect to pay to have this done on a 2006 Accord? I'm tired of car people ripping me off because I'm an old woman.

[@iAmAdrianClarke]

Can you fit a front bumper from a 2007 Honda accord sedan on a 2004 Honda accord sedan?

[@1AAuto]

It's not something that we have tried. The body lines or mounting points could be different. 1aauto.com 888-844-3393

[@iAmAdrianClarke]

Ok, thank you

[@Bryantrincon413]

Messing with the grille at 7:10 sounds like a clip broke off you can hear it falling i hate clips

[@1AAuto]

Thanks for checking us out. 1aauto.com +Bryantrincon413 FAM

[@Knottykid]

I've a question the bottom black part where the bumper attached is broken I would like to know how is it called so I can replace it on the video thats around 2:13

[@1AAuto]

+knottykid It is typically refereed to a splash guard. Hope this helps you out. 1aauto.com

[@Knottykid]

thank you

[@lisawilson7191]

what if some of the clips are stripped?

[@1AAuto]

You might be able to replace them with new ones from the dealer.

[@Noname-wh6bf]

Would this also apply for an 03 accord?

[@1AAuto]

The process may be a little different on your model. We will keep this vehicle in mind for future videos. 1aauto.com 888-844-3393

[@KamoCyde]

Yes its the same for 03-07. I have the 03

[@AderialLynn]

This is what I was wondering, the curb caused it to pull away on both sides on my 03 accord.

[@TheFaborites]

i dit on my 05 accord

[@terrythepion6181]

If I don't put that styrofoam part back on with the bumper would it matter

[@nunyabusiness5075]

The styrofoam often prevents the bumper cover from flexing too much and the paint cracking. So....not critical, but they did put it there.

[@TheFaborites]

people you can put a 07 bumper in 03 accord

[@BossSfeedy]

I don't think so. Bumper design is different and I think the holes for the clip as well but not sure

[@IbrahimSaheed-xl5cf]

Recent engine