HOW TO REPLACE FRONT CONTROL ARM ON FORD FIESTA MK7 ST

[@WorldMechanics]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info/door/J9xpq0qUZevSEdBSFqO2ow ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@rianna-fairfield4121]

Very nice video. Very clear and easy to follow instructions. Thank you. One thing that will help… when removing the bolt that retains the ball joint, put the impact driver on the 13 mm bolt head, not the 15 mm nut. Then the bolt slides straight out, no need to be hitting it with a hammer.

[@ryanjdigiorgio]

You guys are hands down the best DIY mechanics for this platform, thank you!

[@memphis_sean8169]

i wouldve actually liked to have seen you put it back together 😂

[@AlanCooney]

I've just managed to get wishbone off "same" car. Not easy, hardest bits was separating old ball joint - needed 2lb lump hammer to knock pinch bolt out, and same 2lb lump hammer with "fork type" ball joint separator to make any progress! Wiggling unbolted wishbone out of underbody was tricky too! Was going to give up, but managed it in the end! Thanks for great video.

[@martinfreekie7659]

I need to replace the ball joint on mine. I noticed it was only £5 more to buy the whole wishbone with all new bushes and ball joint fitted so thats what ive bought to avoid the hassle.

[@godblessyou9743]

Can you do it without the fork tool

[@oida83]

Thanks guys!! Super helpful for inexperienced like us!! 😅😅

[@AKtoTok]

thanks man, was a major help. replacing the passenger control arm on my girlfriends fiesta.

[@Hamzslice]

Good video maybe show how much of a pain in the ass it is to put back in lol.

[@ridgid859]

Thanks guys! great video walk through, super helpful guys!

[@rapinncapin123]

Good video gents!

[@Riiigo91]

I need some help with this, so far I’ve got 2 control arms bjt the insert on the busing is too small for the original bolt to fit, I don’t know what the issue could be? It’s for the car the year make and model and trim, so why isn’t the bolt bigger than the hole on the bushing?

[@liamboyle184]

There's 2 type 18mm or 21mm st changed between certain years

[@fcoroman1761]

Es una gran ayuda tus videos gracias 👍👍👍👍

[@codybob5]

Thanks guys very helpful

[@markmoore7765]

Your a super star 😄👍

[@aljaypagstravels]

I have idea how to change lower boll joint nice video. Im here new friend done to watching you

[@godblessyou9743]

My ball joint still wouldn't come out had to put it all back together

[@genesis204]

How do I press out that ball joint

[@billmarszal9289]

buy the whole control arm