How to Replace Front Driver Side CV Axle 03-07 Honda Accord

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@prodigyponies3083]

1A Auto: Repair Tips & Secrets Only Mechanics Know The bolt you removed at 3:10 wont come off i already took off the nutt no issues but when trying to hit it with a hammer it goes absolutely nowhere and putting an impact wrench on it doesnt do anything

[@williamharris4046]

How much is the part.

[@makeittrades5750]

you website needs some serious work. Unable to choose trim for a honda accord. Search bar does not find results cv axle, sidebar is horrible. Shopping elsewhere. Peace.

[@johnlindsey6412]

This video gave me the confidence to replace a broken cv axle. Great camera work and explained well. Thanks! Im 58 and remember when there was no youtube with helpfull videos like this! It makes it easy to do the work yourself and save big money!

[@jeffcarpenter3241]

Video super helpful. Was able to replace driver side axel myself in about an hour and save a ton of money. I think I could do the other side even faster since I did this one and watched the video. I thought this was going to be an all day job. Thanks so much for posting. I appreciate the pace and letting us know the sizes of the nuts and bolts, saved a bunch of time trying to figure out what size. Huge difference in the handling of the car, no more shaky steering wheel and no more clicking when I turn right. Steering feels more solid. 2005 Honda accord EX.

[@1AAuto]

+Jeff Carpenter Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@fdog2304]

Great video, one of the best I've seen here. Kind of glad I had somebody else do it the other day though, as painful as the cost was, replaced both left and right axles, 2003 Accord, 270K miles. Not quite so glad I clicked the link and saw how inexpensive the parts that were replaced could actually be. As they say, oh well. (It will make me think a lot more before telling them to just go ahead and do it the next time something "major" needs to get fixed.)

[@dgriffin6074]

Nicely done. Gives me an appreciation of how much is involved in replacing the axle.

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Daryl Griffin

[@KDNBLK]

You’re my hero! Great video! What I loved most is that from the beginning to the end, you were doing and explaining as you went! If this 30 min video were on a different channel, it would most likely be 5 minutes of work and 25 minutes of talking about crap Yours is amaZIN!!!! Love it dude!!!

[@1AAuto]

+KB DN Thanks for checking us out! 1AAuto.com

[@llamasama4458]

I really appreciate the good choice of camera angles and the music not being loud ralative to the commentary.

[@noahschmartz2354]

this guy is a joy to listen to and watch.

[@1AAuto]

+Noah Schmartz Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@dacianazerinity2052]

Only gotta be 2% smarter than what you're working with and you're obviously 150%, thanks for the wonderful explanation and walkthrough. This is gonna be a lot easier with your help. Thank you for this video.

[@jamespletcher7574]

An excellent video. Thank you. Very professional, to the point, and no useless palaver.

[@1AAuto]

+James Pletcher Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@universalityofremodeling]

That's a lot of work to a change CV Axle. I guess I won't be getting an Accord! Great Vid..."One Love - Bob"

[@TeddyPatrickS]

It's a lot more work on a lot of other cars. Accord's are easy relatively speaking. It's a lot of work to change a CV axle just in general lol

[@BennyB00per]

About to do this job on my 2004 honda accord thanks for such great detailed information!! This is why I buy from you guys!

[@1AAuto]

+Benjamin Nicholls Thank you for your feedback!

[@BennyB00per]

@@1AAuto Is this the same way done for a 2004 Honda Accord 4 cylinder lx? 2.4 liter? It looks like it is. I changed out the sway bar link stabilizer however now I know that this is the job that needs to be done.

[@quixotic317]

@@BennyB00per yes. It is

[@DoneWaiting]

Never seize is my favorite thing in my chemical cabinet. I work in Nh and you learn the handle every fastener with kids gloves. Even lug nuts can get stuck and break occasionally.. It would be great when you get the cold weather package in a car it means they add never seize to every fastener.

[@1AAuto]

+Kristopher Libby Thanks for the tip!

[@billlackey8363]

Great video. I have an accord that first drive on cold morning feels like the road is bumpy. It smooths after a couple of miles . Wonder if that is CV going bad?

[@Youtubelacksfreespeach]

Best video I have ever seen! Doing this tomorrow! It’s going to take me forever but this will really help! Subscribed

[@dannyr333]

Cv axle on the spindle end is essentially a massive swivel type part Wow I always known that but it’s just cool how it can still rotate on 2 axis

[@unebonnevie]

Excellent camera angles and clear views!

[@1AAuto]

+unebonnevie Thanks for the feedback!

[@mics67]

I also would definitely recommend removing brake caliper to relieve stress on hose and it will make removing much easier.

[@alexkairis3927]

Step one: have a lift Awwww crap. Step two: stop losing the 10mm sockets DAMNIT! Step three: Have an impact wrench - FINALLY! Something I can do.

[@DavidKHill]

Professionally presented!! Good camera angles that facilitated an excellent How To!! Thanks!!

[@iallison401]

Im going to do this this summer. I think im going to go ahead and take the shock fork off cause knowing my luck i'll rip the boot getting the new axle back on your way. Great great great video though!

[@1AAuto]

+I Allison Thanks for checking us out! 1AAuto.com

[@mckoylach1622]

Thanks for your video. So is the axle nut for an 08 accord,also size 32 mil ? I need to do mine

[@scottkiddx]

My 03 v6 was a 36MM ...

[@jacekm]

Przerabiałem prawą stronę od strony pasażera. Auto wersja EU. Wymieniłem przegub wewnętrzny i wibracje praktycznie zniknęły przy 40km/h. Teraz ciekawe ile czasu podziała bo to nie oryginał tylko Driveshaft/Pivotal. Staram się nie uderzać młotkiem nigdzie, stosuję ściągacze sworzni, no chyba, że nie chce wyjść to uderzam bo muszę 😊Pozdrawiam.

[@justinandrews4368]

Any thoughts on what’s going on if when I removed the axle the transmission fluid all leaked out. Is it just a deal or does that probably mean my transmission is shot

[@23ginger]

I just did this on my car and I just removed the wishbone entirely instead of the sway bar link.gave More room and it’s easier than dealing with the link

[@jacobs8760]

Thanks for the video. I noticed after replacing mine, that the boot is sometimes rubbing against the lower control arm. Now I have a pinhole size leak. Anyway 2 adjust this?

[@1AAuto]

+Jacob S Thanks for watching! You should make sure that the vehicle has a proper alignment and the parts were reinstalled correctly. If the boot has a leak you will have to have it replaced.

[@jrlannum]

"I've got a swivel, I've got my air gun, you can use a ratchet. You do you boo boo" ,🤣🤣 lmfao great video.

[@GetSwedenborg]

Fantastic How To video! Made the job look simple.

[@1AAuto]

+GetSwedenborg Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@jasontaliaferro3657]

You can lift the control arm with a jack instead of lifting manually and using a screwdriver.

[@oonojoe]

This is a good dude! Nice work.

[@nicholasstephey8475]

Great video. Had it out and new one in 30 minutes

[@awesometuscaloosa7203]

Nice! Took less time than expected, now I have spare time for some KZbin 👊😉

[@Whiteblueblackgeeen]

If you don’t have an air chisel is it still easy to push the axle out of the wheel bearing like you did?

[@-idahos_unknown-3573]

will this require an Alignment after installation

[@dmcresins]

Nice one, I was wondering what the dampner in the middle of the axle was for and why the new one didn't have it, instant panic!:)) 👍

[@1AAuto]

+dmcresins Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@JereNupponen]

Is the oil coming out when you take the driver saft out??

[@sa1nt_john.v1]

My steering wheel shakes a little bit after take off and shakes more at around 60-70 on the freeway. Could that be my axels? I got an 05 Acura tl

[@gotze1772]

Excellent video.Thank you

[@1AAuto]

+Goce Andrevski Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@kevinc5917]

This video is fire!

[@ajauntemason3868]

Do the 2.0 and 2.4 use same axle??

[@LuisLopez-kq4ez]

Is this the same procedure if the car has a manual transmition?

[@tserevenad]

You guys have great videos, but I wish you would demonstrate the failed part.

[@1AAuto]

+tserevenad Thanks for the feedback!

[@questorhh]

Hi 1A Auto, does the snap ring on the transmission end of the CV axle ever come loose and get stuck inside the differential? If it does get stuck inside the transmission then when what can be done to remove it? I have this fear it might happen if I try to pop the axle out of the transmission.

[@1AAuto]

+questorhh Thanks for watching! That can sometimes happen and you will need to remove it before it causes damage to the transmission.

[@questorhh]

@@1AAuto Is it difficult to remove?

[@actionjackson129613]

Hey what about the balance mechanism on the oem and not on the replacement parts i always struggle finding an axle that wont vibrate like the oem one

[@Only1JayMar]

I’m working on my 05 accord & the bolt connected to my control arm is not budging. I used a hammer but I’m only ruining the nut that was holding it in place. Any ideas?

[@rustyshakleford341]

Melt it off

[@RitmoAntiyanoDiferente1]

hi a question about the axle nut is it 32mm or 36 mm because in the usa the honda accord i have in europe is called acura tsx,but i see on the tsx the nut is 36mm

[@kepcoate9081]

It is 36mm on my Honda Accord 2007 SE V6.

[@harveyadams5453]

If you really think Honda putting that damper on to limit NVH concerns had no merit.then you are mistaken. This is the reason why we do not deal with aftermarket parts for the most part.. I'm sure 1A Auto engineering department is superior to Honda....yea right.. again this is the reason why confident automotive technicians try to stay far away from aftermarket parts as possible and practical

[@joshuabrouillette7061]

I died @8:56 when he said you do you boo boo🤣

[@1AAuto]

+Joshua Brouillette Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@AdamJacksonn]

is anyone watching this bc they tried doing a fwd burnout and broke their halfshaft?

[@svtbird9613]

I punched it from a stop light

[@johnriley8713]

11:01 That brake line is SCREAMING!!

[@Lilly_only_on_Yt]

Lol hit the nail on the head... I am replacing mine because of the dampener snapping

[@santiagogaitan4884]

Thanks for your knowledge

[@1AAuto]

+Santiago Gaitan Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@justinshannon5819]

How do u get cv axke boot removed from transmission

[@BassheadGTP]

Tell me A1 now what would you do if that wishbone bolt is seized in the bushing in the lower control arm???

[@robertlopez616]

Hit it harder

[@miscellaneous-gaming289]

So what did you do? I’m stuck at this point too

[@RobertConnollyOATS]

Why the difference between the two cv axels

[@ddartemio]

Thank you great video.

[@juanmoreno5187]

Do you know why my cv axle not wanting to fit all the way in the spindle. It just grinds it

[@1AAuto]

+Juan Moreno We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@eds.8900]

What is the part number . I changed mine with AutoZone and two Napa axles and had the axle wobble.

[@1AAuto]

+Ed Seda What is the year, make and model? We can then check our inventory. Thanks for checking us out!

[@Marine-io2tn]

Why no tools list for this video?

[@gerardorivero1611]

Que número de parte coloco para comprarlo

[@hitman6191]

You do you Boobo lolololol Great Video. You saved me some money

[@NamTran-wl5kk]

How to change the Honda 99 Honda passport Axly

[@cutiewithoutacare]

Do you have a shop here in Los Angeles?

[@1AAuto]

+Cutie Without A Care We are an online retailer so we do not have any physical shops. Visit us at www.1aauto.com

[@rizwanali9050]

Where have you country 1A Auto parts

[@mikeybarraclough8223]

2:37 thats the lower part of your strut fork, the lower part of the strut is above the cv

[@mikeybarraclough8223]

also good to flip the castle nut before hammering it

[@daviddurango840]

yeahh.....it's gonna be the shop for me.

[@1AAuto]

+David Durango Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@turbinesnake]

Try it on the garage floor on your back and nothing comes out that easy 1 you need a torch and good tools and a strong back..

[@DefinitiveAccess]

in the middle of doing this job in the garage now, everything's coming apart like butter for me. Just need the right tools.

[@fflynnful]

I just did both sides on the floor with jackstands, not a problem.

[@zigner]

Experiences on how difficult it is vary depending on what climate you live in (winter salt).

[@EnvyDesignGroup]

Amazing content. Thanks for sharing.

[@mikenike7177]

Muchas gracias 😊 !!!

[@user-be9ii9ut4t]

36mm axle nut socket

[@ricky2371ify]

Can a 03 Honda axle fix 03acura tl driver side ?

[@1AAuto]

+Lord Vadar1 If you have a 3.0 2002 Accord it will fit.

[@ricky2371ify]

🙏

[@uhmeizuhngralphf0549]

Without a rubber damper in the middle that thing will vibrate

[@rx7drifter8]

"Safety is first at 1a auto" removes bolt with 10mm deep chrome socket 1200ft impact gun

[@CesarHernandez-lc3lt]

Dont kno what tools he uses

[@Dolliehomee]

U r in a shop, use a stand jack to jack up the control arm up to line up the wishbone hole man...

[@marcgillette8257]

My 2007 is very different than this model

[@jeffpro8]

Looks complicated, its' no wonder why it costs so much to repair.

[@mr.r59]

Where's the power tools

[@HernanHH95]

18:20 That thing was bending,

[@mitchelllankford468]

Clicking when making turn

[@1AAuto]

+Mitchell Lankford We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Thors_Garage]

This guy is rough on the parts. And he's using a chrome socket on an impact. Not to mention dropping a tire on the ground like that to start can actually do damage to the belts.

[@yoisell154]

Hi, It would be great if they could put subtitles in Spanish. I think they would gain many more likes on the page and it would grow more. Also that they could export their parts to Mexico greetings from Mexico greetings.

[@jasonmcanulty4813]

This is the US, dude. We speak English. I would be watching a different channel if there were Spanish subtitles during the video.

[@bortsimpson4536]

I'm surprised they edited out all of the cursing. If I did that job every other word would be inappropriate.

[@andydebruijn345]

Can someone give me a list of all the tools I will need

[@Wadagamebinmisin]

Andy de Bruijn he has a list in the description🧐🤔🤦🏻‍♂️🤨

[@ben5073]

NIIIICE... Subscribe!

[@greenfukn]

anyone else full throttle with a half inch air tool and a 32 lol

[@fernandogalvan626]

My anxiety went crazy with guy explaining how to do this there has to be some else that does have ADHD to explore this

[@reddoggy1]

Mine rotted in that very spot

[@RedMohawk95]

haha he didnt say you do you boo boo lol

[@rastomasstanford7708]

You do you buu buu

[@asimovsky6728]

mkay?

[@fagittarius555]

Awful camera at 14:00

[@fernandogalvan626]

My anxiety went crazy with guy explaining how to do this there has to be some else that does have ADHD to explore this