How to Replace Front Inner Tie Rod 06-18 Toyota RAV4

Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ia/1ASF...
This video shows you how to replace a worn, rusted, or broken inner tie rod, on your 06-18 Toyota RAV4.
• Check here for more videos on the 2005-16 Toyota RAV4: • Toyota RAV4 2006-12 3r...
This process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oc/1AXA...
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXA...
• 22mm Wrench
• 17mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Inner Tie Rod Removal Tool 1aau.to/oa/1AXA...
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• Locking Pliers 1aau.to/oa/1AXA...
• Pliers
• Straight Cutters
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXA...
• A Piece of Pipe (for leverage)
• Torque Wrench 1aau.to/oa/1AXA...
• 15/16 Inch Wrench
• Liquid Thread Locker
• Marker / Writing Utensil
• Rust Penetrant
• Wire Ties
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: • Toyota RAV4 2006-12 3r...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@JohnSmith-ok9sn]

Thank you. Excellent video. P.S. So that your boot doesn't twist, as you're removing the jambnut, first, take off the small clamp off the boot, and then go on taking off the nut. The inner tie rod can spin all it wants after that, without running a risk of getting ripped off.

[@Larae-fu8yu]

I like these videos Straight forward no BS clear explanation better understanding!!!! Keep doing these I need to fix my Rav 4 thank you 👍🏾💯

[@eduardojustiniano3681]

How do you know when an axial needs to be replaced

[@JetFire9]

Nice

[@honestreviewscanada]

Toyota does not offer an OEM inner tie rod and recommends replacing the entire rack.

[@mauriceclemens3286]

Needing special tools I would have a pro do the job.