How to Replace Front Wheel Hub 05-16 Toyota Rav4

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@HungryCats70]

Really a well-planned, clear and instructive video with no fluff. Great camera angles and clear, demonstrative instructions. My ONLY issue is how easy the parts and bolts separated. I'm currently replacing just the calipers and rotor on a 2005 RAV4 and at least one bolt is frozen solid. Using lots of penetrating oil and muscle, but no joy so far... Thinking about replacing the rotor/wheel dust cover/shields because they're so badly rusted, but that's probably another project in itself. Anyway, thanks for the excellent instructions! Subscribed!

[@MiteyMOofyearsAgo]

One of the best DIY vids I've seen yet. You do an excellent job narrating. Thanks!!!

[@directdeliveryexpressinc.4818]

I noted that the CV axle threads magically went from rusty to shiny and new mid procedure. Neat trick to rejuvenate it like that. Hope mine does the same.

[@PecosHank]

Thanks for the walk through. Gonna let a pro deal with my bearings.

[@dioknogarcellano3563]

I like how you demonstrate the job. I think you are an honest car repairman which is different from other guys who are making money n fool car owners just to make money from them.

[@feeshermann726]

Thanks for the excellent video...everything was clear and concise!!

[@BrianHoff04]

Nice video & instructions. I tool out the ABS sensor just to make sure I didn't break it during removal / install.

[@capricornio9343]

Make sure you remove the abs sensor before you start hammering 🙏🏼

[@bunnystuff23]

I believe this would be for an 06-16 Rav4. 05 has pressed in bearings in the front (unfortunately)

[@thebeukemas]

Very clear and detailed hub replacement , so easy even a caveman can do it

[@balibois]

Very clear video and easy to follow. I love it buddy!!!

[@toyedxiong]

Best bearing hub replace ever

[@MrShanilicious]

The axle nut indent is a pain to punch out of the groove. Ended up gouging into the metal on the axle shaft instead. Could use some info on the specific size of the punch you used in this video

[@letfingerswalk]

First class video.

[@davidkoda1140]

Thanks a lot, now i can replace my hub ...

[@rf55f15]

Great Video, I have couple of questions. 1 - Can you take the caliper brackets off without taking the caliper off so less work but also don't have to push the brake piston back in? 2 - I don't have a bucket of bolts, do you know what size of bolt I can use for my 2007 Rav4 Limited in the holes to pull the rotor off the hub? Thank you.

[@seabassvlogs3011]

1) Yes, I’ve done it before it’ll just a tight squeeze back on. 2) Use a Hammer just be carful not to smash the actual rotor and just hit it on the face where the wheel mounts. It’ll definitely take longer but if you wanted to just get the bolts i think they are M8x1.25.

[@mashaisbaltodano3914]

Great Video very helpful thanks

[@randomtech6115]

Do y’all have the rear backing plate??

[@shawnwoodsman]

Thank you. Great video

[@TRQ]

+Shawn Meyer Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@skipdog77]

Is the 2017 Rav4 the same procedure?

[@45eno]

Any reason you shouldn't let a friend just hold the brake while torqueing the axle nut? With the brakes back together of course. Figured if you have someone around to jump in the driver seat you then wouldn't need to have a long crow bar or stress the lugs.

[@mysunnysunshiine]

Thank you for your time

[@TRQ]

+TexasMade USA Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@josephrouse1443]

Whats the bolt size to push the caliper off?

[@moustachemike7128]

should read 06 to 16 not 05.....different parts and procedure....i wonder if it can be moded to 06 front end parts...????

[@edwinaviles5779]

Hey thank you good job

[@TRQ]

+Edwin Aviles Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@shaqmilb12]

Hey thanks for this I just replaced my front wheel hub bearings in the front first time ever great experience I got lucky no rust everything came off easy 2013 rav 4 thank you. Anytime I tend to take my tire off and put it back on there's a rattling noise the tire place in my neighborhood put their hand through my rim one time and did something with the plate to make it stop making noise I wonder what they did does anybody have any insight on this? Sounds like a light grinding noise I know that I put everything in together fine..

[@Jeremy.v]

Bent backing plate. They bent it back into place slightly so it’s not rubbing on the disc

[@Jeremy.v]

Shaq Milb I’m assuming when you take the tyre off you are hooking the backing plate somehow bending it causing it to rub on the disc

[@roeldeleon6419]

No se explicar en ingles, Que pasa si no tengo la llave digital para dar el apretón a la tuerca del cojinete,

[@Jimmy_Jim_Jim_1234]

159? I read the Axel nut is 215 ft lbs....

[@punkisinthedetails1470]

What is the 30mm 12pt Socket for?

[@TRQ]

+PUNKISINTHEDETAILS The 30mm 12 point socket is used to remove the axle nut.

[@joshkillz2724]

2005 is not same it have same motor but not the part