How to Replace Front Left Forward Inner Lower Control Arm Bushing 2002-2007 Chevrolet Trailblazer

Buy Now!
New Control Arm Bushing from 1AAuto.com 1aau.to/ia/MGSM...
This video shows you how to install new front lower control arm bushings from TRQ on your 2002-2007 Chevrolet Trailblazer. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• 21mm wrench
• 19mm Socket 1aau.to/oatc/1A...
• 21mm Socket 1aau.to/oatc/1A...
• Ball Joint Press
• Press
• 1/2 Inch Ratchet 1aau.to/oatc/1A...
• 1/4 Inch Ratchet 1aau.to/obri/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obMy/1A...
• Torque Wrench 1aau.to/oaUE/1A...
• Gloves 1aau.to/oaAs/1A...
• Safety Glasses
• 7mm Allen Wrench 1aau.to/ocW/1AX...
• Floor Jack 1aau.to/oaiL/1A...
• Jack Stands 1aau.to/o6Z/1AX...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@wild8757]

Unfortunately not everyone has a benchpress, 200+ torque wrench and air chisel

[@adambennett7168]

That part that he was working on was all rusted the party put in was brand new😅

[@Vet-zj5lq]

My 05 Colorado front lower arm rear bushing is attached to the frame. Do I need any special tool to replace it? I haven’t find any video about it. Any advice will help. Thanks.

[@Thesaurcery4U2C]

I am glad that I live where I do, I have zero rust on my neither regions. Great video. Thank You!