How to Replace Front Left Lower Control Arm 2004-2015 Nissan Titan

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASL...
This video shows you how to install a front left lower control arm on your 2004-2015 Nissan Titan. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Pry Bar 1aau.to/tGa/1AX...
• 18mm Wrench
• 19mm Wrench 1aau.to/tMi/1AX...
• 21mm wrench
• 18mm Socket 1aau.to/t72/1AX...
• 19mm Socket 1aau.to/t72/1AX...
• 21mm Socket 1aau.to/t72/1AX...
• 22mm Socket 1aau.to/tgJ/1AX...
• 32mm Socket 1aau.to/tbK/1AA...
• Pickle Fork
• Side Cutters
• Torque Wrench 1aau.to/taeW/1A...
• Copper Anti-Seize
• Marker / Writing Utensil
• Floor Jack 1aau.to/tJR/1AX...
• Hammer 1aau.to/tI9/1AX...
• Jack Stands 1aau.to/tGB/1AX...
• Punch
• Wire Brush 1aau.to/tor/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@dylanbateman7686]

Nothing is ever this easy when it comes to suspension parts.

[@brayden4079]

To all who read this. This is on a 4 wheel drive on a two wheel drive you do not have to mess with the rotor in anyway other than popping the ball joint loose from it

[@adamprice8757]

@TRQ if I’m going to do all front suspension, what is the preferred order? Upper control arm, tie rods, sway bars, lower control arm? Thanks in advance

[@DanPhillips-qy1pt]

Thanks so much I followed step by step and it was so easy

[@bilnitro]

I saw that 22mm 7/8 wrench :)

[@nanieberoin4902]

Where is the camber adjustment, it's the front or the rear?😅

[@mtzgbl]

My knuckle doesn't want to go back on. I wish it just slipped on like in this video. Mine isn't even that rusty. It was difficult to get it off too. I had to beat it a lot with the pickle fork

[@adamjubril5608]

Great video, it helps a lot thanks, im kinda suprised to see len from 1A auto repair in TRQ channel, nice.

[@rashadm.sadigov4366]

Awesome video

[@kpdvw]

same for a 2008 Nissan Frontier...Thanks!

[@anthonyp3814]

Excellent

[@mb01269]

Need to cut my arm bolts gonna suck.. good vid ty😊

[@TRQ]

+mb01269 Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@aureoperez5457]

El mio lo cortaron los tornillos 🔩del controller Arm y pusieron unos nuevos no es la orijinal No pasa nada que alguien mediga

[@TitanTown]

Dont forget the copper anti seize!

[@King5150Ed]

Mine just broke off at the shock mount while driving......yikes