How To Replace Front Lower Ball Joint 01-06 Hyundai Elantra

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
New Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASB...
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, loose, or damaged tie rod. This video is applicable to 01-06 Hyundai Elantra.
This repair was done on a 2005 Hyundai Elantra and the process should be similar on the following vehicles:
2001 Hyundai Elantra
2002 Hyundai Elantra
2003 Hyundai Elantra
2004 Hyundai Elantra
2005 Hyundai Elantra
2006 Hyundai Elantra
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oiG/1AX...
• Pry Bar 1aau.to/ob6/1AX...
• 14mm Wrench 1aau.to/ocf/1AX...
• 19mm Wrench 1aau.to/ocf/1AX...
• 14mm Socket 1aau.to/oir/1AX...
• 19mm Socket
• 22mm Socket 1aau.to/oad/1AX...
• 30mm Socket
• 36mm Socket 1aau.to/ok/1AAS...
• Vise-Grips
• Ratchet 1aau.to/ojo/1AX...
• Socket Extensions 1aau.to/oir/1AX...
• Torque Wrench 1aau.to/ofi/1AX...
• 9/16 Inch Wrench
• Bearing Grease
• Floor Jack 1aau.to/ocA/1AX...
• Jack Stands 1aau.to/oco/1AX...
• Large Hammer
Subscribe: / @1aauto
Check out our playlist:
2001-2006 Hyundai Elantra 3rd Gen: • 2001-2006 Hyundai Elan...
For More Info visit us at 1aau.to/h/sR/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@lc04071994]

Spent a lot of time looking thru other videos non as good as your thank you 🎉

[@1AAuto]

+Lorenzo Creswell Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@glensmith143]

This was an excellent video! It was crucial in helping my friend replace his. I also appreciated the 'fast forwarding' that most wont/don't do. Thanks.

[@1AAuto]

We're glad the video helped. Thanks for watching. 1aauto.com 866-403-3393

[@sl1587]

was going to get at something like bockauto and when I saw the great video I purchased from 1a auto. thanks again

[@1AAuto]

+S L Thank you for your order! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY

[@jokeer14]

thanks guys!! thumbed up, liked and subed

[@adversarygames]

Thank you so much for the videos!

[@أبومنصورالمنتصر-ل3ع]

That is very good thank you

[@bigden31]

Just curious, what is the point of taking off the sway bar link?

[@alexdashevsky2180]

I think it easy to purchase control arm assembly with bolt joint. Because they very cheap.

[@tamitam1670]

Hello there, if I buy stuff from you guys, can you ship it to Canada? if so, how long it will take to Toronto Ontario area?

[@1AAuto]

It takes about 10 business days to arrive in Canada. Sometimes it will take a little longer depending on customs. Thank you for watching! +tami tam

[@Ap-nv1hk]

Is don still with 1A auto ? The news guys are not as good

[@afandiyusuf3873]

usefull

[@1AAuto]

Thank you for watching! 1aauto.com 888-844-3393

[@chevywaldo8561]

I'm not sure if they got the boot C-clip correct. I think the C-Clip is to be placed "over" the boot - not under it. I have to call them.

[@1AAuto]

+Lee Wallace Nope, the C-clip is actually there to help hold the ball joint in place, not to keep the boot on. Great question though! Thanks for watching. 1aauto.com?KZbin&CTA%20Comment&ATony 866-403-3393

[@andresmejia9916]

great

[@310smoker]

OK nice job

[@suzannehylands5796]

Arrière

[@2380Shaw]

That all looks like in reality takes 15 hours to do lol

[@kenbobify]

Harbor freight presses are 50 bucks cheapo

[@user-vh3sw7uj2w]

I don’t understand how this looks like a decent shop how do they not use a impact for bolts or a press for ball joint maybe this is for people doing it at home that don’t have money for a H frame press or A frame press the video is great I just think they worked way harder than they had to other than that great video

[@davidfaust2694]

This has to be the WORST REPAIR video I have ever seen from your company!!!!