How to Replace Front Lower Ball Joints 1994-1997 Honda Accord

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ib/1ASB...
This video shows you how to install new, quality TRQ ball joints on your 1994-1997 Honda Accord. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obKU/1A...
• Pry Bar 1aau.to/oabL/1A...
• 10mm Socket 1aau.to/obNP/1A...
• 17mm Socket 1aau.to/ocfz/1A...
• 19mm Socket
• 36mm Socket 1aau.to/ode/1AA...
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/onQ/1AX...
• Side Cutters
• Ratchet 1aau.to/ocgm/1A...
• Socket Extensions 1aau.to/ocfz/1A...
• Torque Wrench 1aau.to/obiV/1A...
• Copper Anti-Seize
• Gloves 1aau.to/objz/1A...
• Liquid Thread Locker
• Paper Towels 1aau.to/oR3/1AX...
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Floor Jack 1aau.to/oaDf/1A...
• Hammer
• Jack Stands 1aau.to/oapT/1A...
• Pole Jack
• Punch
• Vise
• Wheel Chocks
• Wire Brush 1aau.to/ozk/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@elgatogordo9523]

Thanks for the informative video 👍Just what I needed to work on the old girl. She’s in need for front suspension and CV axles replacement.

[@blacksongoku312]

Perfect vid for the work I'm doing on my wagon!

[@contikoo2358]

extremely helpful, thanks🔥🔥