How to Replace Front Lower Control Arm TOYOTA CAMRY 2.0L 2002~2006 1AZ-FE U241E

[@tomshiba51]

I have changed out control arms at least four times on the Matrix/Vibe. It was always frustrating to align the holes and thread the bolts into the engine cradle twice for each control arm. The Camry control arm looks so much easier to remount aside from loosening and removing the engine mount for space.

[@leebeavers6912]

Smart and quick, very good job on both the car and this video. Please make more. Could you make one for front strut of Camry? Thank you and keep making more. This is a great tutorial!

[@airvine91]

Clever. Smart. You work fast!

[@MRMAN-wb1tv]

*You was close to breaking or losing a finger when that engine dropped back down on that mount!*

[@ajanieproctor3848]

Thank you

[@TruthSeekerAll]

Penang kia?

[@eliasgonzalez594]

When I lifted the engine the axle boot broke be careful

[@dwash986]

When you did new install everything lined up easy. I just did the same lower control arm and I have like a 1-2 inch gap between the ball joint and lower control arm when installing new part, what did i do wrong?

[@onlyonecannoli3952]

Same problem today. Did you ever figure it out? I'm going to try to fix it tomorrow.

[@ShogunAutoworks]

Cam alignment bolts. There should be either the front or rear bolt that is offset and turning it different degrees would shift the arm front and rear to fine tune the alignment. I assume the camry has to be this way also.

[@notme22]

Your axle popped out of socket. Just need to shake the knuckle until it pops back in.

[@reynaldogonzalez8209]

Primero: vídeo mudo, segundo: hay que desarmar casi toda la parte de abajo

[@MRMAN-wb1tv]

*One of the dumbest design ever! Although I must say my 09 Camry with 255k has done me well other than normal things like this*