√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@SalvatoreGarofalo-gk6zu4 ай бұрын
Nice video, and may be good for brand new vehicles, but my Escape has 195,000 miles on it and I have to cut the bolts with a Metabo cutter. 5mm l wrench just stripped right out, and the nuts are all frozen solid on the studs. I finally got them off by cutting at the ball joint, and using vice grips and 1400LB torque Impact wrench. I hope this help those who has a similar situation of Frozen rusted Escapes or any other vehicle.
@kickfliphctp Жыл бұрын
Thank you, these videos are so helpful! I only hope great people like you continue to make these types of videos on newer vehicles and on! God bless you
@levonmcallister4282 Жыл бұрын
Best advice to remove the bottom bolt!! Good job Andy!!!
@djflex69234 жыл бұрын
I replaced these, with the exact same product. I had issues with the nuts coming off, i'm not sure why. I ended up placing my old swaylinks back in. If I attempt this replacement again i'm going to try and use lock nuts.
@isiahzinda27522 жыл бұрын
Loctite is always helpful for making sure that they don’t come off due to vibration, just put some on the threads and you should be set
@davidsnodgrass34933 жыл бұрын
Thanks for the video. It was just that easy, and you saved me some money. Thank you.
@jamieganley9552 Жыл бұрын
Thanks for the videos guys!
@3dr14ng44 жыл бұрын
Thank you for this valuable tutorial.
@1AAuto4 жыл бұрын
+3dr14n G Thanks for checking us out! 1AAuto.com
@AULIGAofBLEED Жыл бұрын
The video was a good help thanks!
@samevo88 ай бұрын
When my car is jacked up, the sway bar hits the control arm. Do I need to remove both end links and rotate the sway bay so the sway bar is not hitting the control arm?
@FalconleoFalconleo4 жыл бұрын
Is there video for rear sway bar links
@samevo88 ай бұрын
I notice that the sway bay will contact the lower control arm when the car is lifted. Is that normal?
@codypape11803 жыл бұрын
my passenger side went super smooth took 10 minutes and the drivers side took 3 hours cause the allen key part was completely rusted out and i had to cut both bolts great video but do i ever hate rust
@1AAuto3 жыл бұрын
+Cody Pape Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@scottkucinski49675 жыл бұрын
Pre-greased?
@flair154 жыл бұрын
excellent video and instructions thank you / merci , make sure the threads are clean on the old parts as the nut will be difficult to remove
@1AAuto4 жыл бұрын
+Terry Wasik Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@chodaidiii3 жыл бұрын
how similar is this to the 2016 escape?
@gibson76545 жыл бұрын
How do you do it with a floor jack?
@mpawofficial2 жыл бұрын
Jack up and suspend each side with a jack stand then change out each link if you run into issues with clearance or tight fit use a break bar to push the sway bar down or up to gain leverage
@PrettyFly4aWi-Fi11 ай бұрын
driver side of mine broke off at the bottom or the nut just came loose & fell off, not sure. called my mechanic & he said "dont worry bout it, they dont do anything anyways" i said ok screw it. but i still wanna get it fixed.