How to Replace Front Wheel Bearing and Hub 2006-08 Dodge RAM

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00075
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2002-2009 Dodge Ram 1500.
• Check here for more videos on the 2002-09 Dodge Ram 1500: • Dodge Ram 1500 3rd Gen...
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• 36mm Socket 1aau.to/oa/1AAST00006
• Side Cutters
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXAA00280
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-09: • Dodge Ram 1500 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@robertkeene6097]

Never cease to impress ! Thanks a ton man keep it coming

[@dma-i8d]

Best repair video I've ever seen. Only the most important parts. You are awesome!! Thank you!!!

[@tone9460]

If i cant find a repair video from TRQ im not happy 😅

[@pedroguzman4084]

Quick and easy!!! Thanks

[@dlascwboy]

No Wire ?, I don't see one on my passenger side (06 Big Horn).

[@slipshaft]

Is it the steering bar or a tie rod? Also, I wouldnt "bonk" too hard on that aluminum knuckle! These videos make it look so easy...parts are often fused together with rust. The only way I could get this done was to entirely remove the spindle and pound out the bearing from behind. That's after I had to jack up the truck with the jack pressing on the bottom of the lower ball joint to get that apart first!! This is not an easy job at all if you have rusty parts.

[@blh3741]

Easy -Peasy! Thanks!

[@jacobmartin1181]

Is this for a 2008( 2WD )Ram SXT?? I need to replace mine

[@geezee1579]

I did not remove the tie rod nut or the tie rod and I cannot get a impact socket on the bolt for the bearing assembly as the axle is in the way. The axle is loose and I did not have to hammer it to get it loose. Do I need a regular socket or would removing the Tie Tod allow me more room to get better access to the bolt. Also you do not have a backing plate on this truck.

[@16352huey]

Nice job!

[@michaelharris4630]

is the driver side the same

[@TRQ]

+Michael Harris Yes, the procedure should be the same for the other side.

[@Herculese182]

He said, "give her a few bonks"

[@antcri730]

You should have made clear that you're removing the caliper AND bracket and not just the caliper.

[@slipshaft]

Yep he removed them all as one piece. That works.