How to Replace Front Wheel Bearing & Hub Assembly 2004-2015 Nissan Titan

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@dawson91b]

Great video. Thank God I’m not on the east coast! That rust is insane!

[@cpersinger1308]

Not that I would attempt this job by myself due to not being the most mechanically inclined when it comes to vehicles but you made this look so simple. What a great video!!

[@TheAlsobrooksHomeCarpentry]

This was extremely informative & helpful for me doing my complete Front Pair of Bearings • Rotors & Brakes. I am grateful and Super Confident in doing these mechanical tasks.

[@ehdwinbush]

REAL MEN DRIVE NISSAN YOU FREAKIN GOAT WELL DONE THANKS

[@TRQ]

+@ehdwinbush Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@91cougar1]

Really like the detail of your videos. You say at 10:05 that the torque for the wheel hub and bearing assembly bolts is 155 ft lbs. The manual that I have for 2013 shows those as only 107 ft lbs. Also, at 23:10 you say that the caliper sliding pin bolts torque to 32 ft lbs. My manual shows 53 ft lbs. You may want to double check those.

[@sorgifigueroa4594]

Thank you so much for the video .I learned a lot !

[@mc8305]

Awesome video very informative and explained very well I feel comfortable taking on this job now ! Thanks for sharing

[@Sam-nt5kl]

Question: I noticed that there was no dust shield. I had to cut mine removing the old hub, is it necessary to replace? Thanks

[@TheIrongutz]

Beware, there are 2 different hub assemblies for 2007 Titan trucks depending when it was built. 2007 1/2 and above was upgraded and won’t fit rotors after install, had to do this job twice after Nissan dealership sold me the wrong one.

[@TRQ]

+TheIrongutz Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

[@adebisikakaki]

Good step by step explanation 👏

[@eanorton72]

What in the up north salt infested roads Titan do we have here Maybe a suggestion would be some upol rust prohibitor with Bedliner undercoat/ chassis black

[@maxmartinez703]

Good video thanks . But why would you take it a wheel and aliment shop for just replacing the wheel hub ?

[@damionfritz5881]

I did one side of my 2008 infiniti qx56 but i do notice the other side is making a roaring noise when im on the highway..so i nned to replace it. Replacing the first one was a chore...it didnt come out as easy as yours..you just tapped yours and it fell out..i probably need some good penetrating oil..im going to spray it the night before so it will really soak in there.

[@JorgheDelgado]

Very well explained,Congratulations

[@didiersindakira998]

Excellent explanation, that is professional

[@omarmelodelgado]

Excellent video, I learned a lot, I have a question, what is that brown liquid that they put in the well bearing? greetings.

[@kalilh9671]

This is an awesome video It instruction is awesome

[@magentatrifoil]

Great video but I didn’t see you put the return springs on the pads…those are a pain.

[@662chungus6]

Would it be ok to wire wheel and paint all the rusty areas my ocd wouldn't let me put everything back together rusty

[@jcast9437]

Very good job! Thank you

[@fanatic_vol9450]

Thoughts on using a thin coat of copper antisieze instead of loktite for caliper bracket and bearing bolts? Did mine before watching but now wondering if it’s safe?

[@robertbernal4959]

Excellent job thank you

[@evelynnveleni]

Question. 1. By parts cleaner do you mean Break Parts Cleaner? 2. Pernatex also sells the PERMATE COPPER ANTI-SEIZE LUBRICANT, 16 OZ Part#31163. Can I use this chemical insted of the copper spray?

[@scottc3165]

That was pro. Thanks!

[@mikefuzzy8795]

Outstanding

[@cbaby5.625]

Is it just me but before he took the wheel off the caliper was rusty then it looks brand new

[@jefaerts4207]

No heat shield between knuckle and ball joints, rubber boots etc 🤯

[@rogerstaats1449]

From the looks of that bearing hub when he banged it out with the hammer, he was at it for a while, beating the f&@# out of it. Edited video. Mine still won’t come loose after PB Blaster, heat and bashing it.

[@patron_bulliez5558]

Are these china parts ???

[@ArtStamos]

Deng I am from WI and my truck is not this rusty 08 with 200k

[@jarnicus42]

You will need a 32mm socket as well, thank you for my third trip to the store

[@johnnyjtv]

You need a new vehicle