How to Replace Front Wheel Bearings 2006 Chrysler 300

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@gmkthekid7455]

Thanks for the video saved my mother some cash, swapped out the bearings for her after work thanks again 🤙🏽

[@1AAuto]

+GMKTHEKID Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@rb26xs14]

Love your working style! Definitely old school, and correct!

[@viol8r67]

informative video. I personally use a c-clamp to compress the caliper piston as it gives a more controlled compression.

[@Dirthauler65]

The big axle nut says one time use only on it, and it didn't come with my new bearing. Please keep this in mind if you're doing this job at home. Make sure the replacement bearing comes with the nut or make sure you buy one before you start the job.

[@theragingcreeper9040]

I just ignore that.

[@thrashingmetal]

you must know better than engineers ... it's a safety thing, there is high stress when torquing @@theragingcreeper9040

[@oscarparks9757]

Great job I watched your video before I changed both hubs with no problems, thanks

[@1AAuto]

+Oscar Parks Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/wheel-bearing-and-hub-assembly-front-driver-or-passenger-side/i/1ashf00369?KZbin&CTA+Comment&V_KTVb4

[@sayian2k]

Always produce quality videos. Thank you so much 👍🏾

[@BlueInfinity44]

5:04 I like how the brake hardware came off by hand

[@doombeast45]

Once again a fantastic detailed video. Thank you so much!

[@staffordsgaming5041]

doombeast45 n ..xd.x.

[@jeremiahholmes6654]

Does the 35mm nut need to be brand new or can I use the old one?

[@1AAuto]

+Jeremiah Holmes You can reuse your original. Thanks for watching!

[@markgardner8786]

Great question, I am replacing the whole suspension on my 300crd and the nut clearly says on it do not reuse. I am going to centre punch it after torque.

[@Texaz1331]

Question when these hub bearings go bad could that cause the traction control light to turn on? I have a 2007 Dodge Magnum with the 3.5v6 my car drives good but the sound is getting louder and now my traction control light turns on.

[@johnringoo756]

Billy Sanchez yes mine did

[@kerrimiller5093]

Yes these cars are notorious for it

[@lokey5.7]

I have a 5.7 an was wondering if the 6.1 wheel bearings will work

[@bigvan706]

What brand was used in the video

[@SLiMCHiCKeN5150]

184ft/lbs? Specs say 157ft/lbs front 184ft/lbs rear?

[@toddevans4631]

Hey this has been a very informative video thanks so much. Quick question, do these wheel hubs for the Chrysler 300 include the reluctor ring? Mine is defective, should I replace the front wheel hub.

[@14dogday]

I don't see any grease in my new barring should i put some in it

[@JZee-xd4cy]

Another awesome video. Excellent!)

[@1AAuto]

+J. Zee Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@josephreis2274]

Nice job

[@newwavepressure6478]

I have an 06 Dodge Charger RT has the same hub but the Hub is stuck on the spindle any suggestions

[@YoungPrincinho]

Don’t bad bearing cause vibration or uneven tires level? Because my dodge vibrate when I go over 80 mph and my right front tire is uneven with the left one.

[@1AAuto]

+TRILL PRINCY That can be one of the symptoms of a bad wheel bearing. We would recommend having it looked at by a reputable mechanic to make sure nothing else may be causing this issue.

[@YoungPrincinho]

1A Auto Parts okay, I’ll get it checked out when I get my new bearings installed because i already purchased them. They were old anyway, about 135k miles on them.

[@malachikidd6592]

How different is this compare to a 2014 Chrysler 300

[@luistoledo3690]

Is this same for all wheel to

[@insanecheetos5775]

Will this be the same in a 2008 model

[@tossemup5210]

Can you replace the caliber bolts without taking off the brakes?

[@1AAuto]

+Nathaniel Phifer Thanks for watching! Yes you can replace those bolts without taking off the brake caliper. 1aauto.com

[@herbertjay7424]

WHATS THE WARANTY ON YOUR PARTS? ARE YOUR PARTS AS GOOD AS MOOGS?

[@trevlouie]

i had no problems with Moog parts, 1a Auto has warranty also pretty much same Moog has 1yr replacement (this does not include removal labour fee) return old part and proof of purchase theyll send you a replacement free of charge.. again this is with Moog

[@rafaelmartinez8996]

MUCHAS GRACIAS, APRENDI COMO HACERLO POR MI PROPIA CUENTA...

[@elperroferoz]

So how much grease is going to fall or drop onto the stopping surface of the rotor? I usually use about 1/3 can between the pad & rotor just to make sure. Thanks for the well made video!

[@jonathancavazos2185]

Will this be the same on a 2015 300?

[@ivanbliminse5350]

I just did my 05 magnum SXT and it was a 36mm not a 35 on my vehicle

[@theragingcreeper9040]

The dust cover is impossible to get off

[@petten20233]

There charged me around 900 euro to change the 2 front wheel. Is this normal price??? (New bearings)

[@brianhamm7297]

Are they all screw on the out parts store said mine are press on I have a 2006 regular Chrysler 300 v6 2.7

[@1AAuto]

+Brian Hamm If the vehicle is rear wheel drive they are press in. If it's an all wheel drive they are hub assemblies. Here is a link to them on our website. Hope this helps you out goo.gl/aDVs94

[@Twix2013PSN]

I hope this is what's wrong with my car because there is no sound but my wheel is moving and my tire is going bald on the outside side of my tire,thanks a lot for the video

[@djongmaful]

twix 2013 check your upper control arm

[@spidermanman9317]

great job:)

[@tomchristensen2914]

I have an 06 300c AWD. I need to change the bushing at bottom of strut that is pressed into the lower control arm. Can that be pressed out?

[@1AAuto]

+Tom Christensen Thanks for watching! Most people do not just replace the bushing because it is much easier to replace the entire arm. At this time we do not offer the bushings separately, but we do have the arms. They can be purchased here if you need them: www.1aauto.com/control-arm-pair/i/1asfk00392?f=538135&y=2006

[@tomchristensen2914]

1A Auto Parts those are not for my car... I have an AWD 300c which you never have videos for lol...

[@jeremyrobinson6902]

Mines went out in a year

[@tomchristensen2914]

Why is it always a red vehicle? Mine is AWD and the change out is different... More videos on an AWD 5.7