How To Replace Front Wheel Hub 2000-2007 Ford Focus

Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ib/1ASH...
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ia/1ASH...
A worn out wheel hub bearing is not only noisy, but can contribute to premature tire wear and damage to other components. When the bearing starts to groan or grind, you should replace it. This video shows you how to install a new wheel hub and bearing on your 2001-07 Ford Focus.
This repair was done on a 2001 Ford Focus ZX3 2.0L Hatchback 2-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Pry Bar 1aau.to/ogh/1AX...
• 15mm Wrench 1aau.to/ogG/1AX...
• 15mm Socket 1aau.to/owH/1AX...
• 16mm Socket 1aau.to/owH/1AX...
• 19mm Socket
• 32mm Socket 1aau.to/oK/1AAS...
• Bearing Race and Seal Driver 1aau.to/og/1AXA...
• Brake Caliper Hanger 1aau.to/oaX/1AX...
• Press
• Needle nose pliers 1aau.to/odB/1AX...
• Needle nose pliers 1aau.to/odB/1AX...
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/obN/1AX...
• T50 Socket
• Ratchet 1aau.to/oyP/1AX...
• Socket Driver
• Socket Extensions 1aau.to/owH/1AX...
• Torque Wrench 1aau.to/ooL/1AX...
• Copper Anti-Seize
• 7mm Hex Socket
• Center Punch 1aau.to/obg/1AX...
• Floor Jack 1aau.to/og5/1AX...
• Hammer
• Jack Stands 1aau.to/ogt/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@TheShawnFennox]

Ok but what if you don't have a press....

[@StevenTyler-h3o]

I am having problems getting the bottom of assembly to go onto the bottom spindle the hub won't rotate down to it