How To: Replace Fuel Filter, Primer Bulb, Fuel Line & Spark Plug on Poulan Chainsaw

👋 In todays video I show you the process of restoring a non working Poulan chainsaw and getting it back to being a functional tool! In the many sources I had to look at, I decided to make a video on this and show the steps needed all in one video to effectively work on and doing this by yourself!
The first step I started with is buying a tune up kit which included a spark plug, fuel/air filters, tubing and the prime bulb. The rework of the tubing took the most time and effort to get right and to figure out which end went where.
AS A REMINDER:
The fuel filter connected to the tube coming out of the left side goes to the top of the carburetor.
The tube on the right side with the stopper went to the prime bulb.
The tube on the prime bulb went to the bottom of the carburetor.
If you don't have the prime bulb filling up with gas after connecting all the tubes, switch the tubes on the prime bulb to the opposite side. One side pushes out fuel and one side sucks it in.
This project took a few weeks to get all the kinks out and really took time and effort to get it back up and running, so if you are going into a project like this, just know it'll take several attempts. At least it did for me, and so I'm hoping this video can save you time with this step by step process!
Once I got the chainsaw put back together, it's time to put fuel and bar and chain oil in it, and it's ready for the season!
Tune up kit with Carburetor: amzn.to/3lTS8E2
Tune up kit NO Carburetor: amzn.to/3xII6YW
🤠 Check Out Our Aftermarket Car Part and Merchandise Website!! brosfourrspeed...
Our Car Accessories:
www.lasfit.com/
SAVE 10% by using "Brosfourrspeed10" on your next purchase!
Our Equipment:
Cannon M50: amzn.to/3CTphmE
Rode Mic: amzn.to/3XTKurs
Joby Suction: amzn.to/3SCrWZ7
64GB SD Card: amzn.to/3bJQwUK
GoPro Hero 10: amzn.to/3H7eRVK
DJI Mavic Mini: amzn.to/3uoOfHS
Apple MacBook Pro: amzn.to/3gSIdMD
LowePro Bag: amzn.to/3wi1wlX
Tripod: amzn.to/3cJMAr1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Music By:
www.epidemicsound.com
#poulanchainsaw #chainsaw #tools

[@lenyancey5236]

Thanks for showing the Poulan saw. Not everyone needs a Stihl for limited use as we are not all lumberjacks. 😊

[@BrosFOURRSpeed]

Very true! Nice affordable way to go and works great. Glad you liked it!

[@derekspartan5163]

I had my huskavarna chain saw fuel line dry rot three years ago was little tricky getting it out but as always saved ton of money doing it myself like anything else I fix everything on my home vehicles & gas powered yard tools, amazes me as a man that there are so many lazy other men that don't want to try & fix things themselves they rather pay tons of money to have someone else fix things totally crazy..

[@BrosFOURRSpeed]

Nice! Always good to be able to fix things!

[@michaelleamon2714]

EXTREMELY HELPFUL VIDEO FOR MY POULAN 2150 ANSWERED ALL MY QUESTIONS

[@BrosFOURRSpeed]

Glad I could help!!

[@s02101]

Awesome video! Really helped me fix my 2050, had to go buy fuel line from an auto shop as we don't have any fuel kits for Poulan in Australia, but it all worked out in the end. Thank you!

[@BrosFOURRSpeed]

Glad to help!

[@AllenStone-vk1cr]

Poulan 16 in" chainsaw 2150 fuelines and carberator adjustments

[@BrosFOURRSpeed]

@@AllenStone-vk1cr This was helpful?

[@HansvanBeek-h4h]

Great video. Should also provide most of how to replace the fuel lines on my old Craftsman.

[@BrosFOURRSpeed]

Glad it could help!

[@thehubrisoftheunivris2432]

I hope you read these. I can't find my stopper for the right fuel line. The large diameter line is very tight. Do I absolutely need to have it?

[@BrosFOURRSpeed]

Have the larger tube? I just used the smaller ones and it’s been fine!

[@thehubrisoftheunivris2432]

I figured it out. Thank you. Think I might need a new carburetor now. Dies when I gas it bud idles okay. Since it's been sitting for so long, people told me to let it warm up and keep adjusting the choke to work the diaphragm before I go that far. I think I have the exact same song as you but the high low adjustments kind of throw me off. Happy for any advice. But I'm sure I'll figure it out.

[@PowderhoundTully]

I got the carburetor kit listed below the video and the fuel line inlets are not both on the right side as you’re looking at the carburetor but one is on the right and one is on the left. Can’t find a new carburetor that has both fuel lines on the same side! Three questions. if I use the new carburetor, how do I determine which inlet to use for which Tube? Second, do you have a link to a carburetor with the same inlet configuration? Third, this Poulan I have is secondhand and incredibly dirty and I’m not sure if I wanna reuse the carburetor. How do I evaluate that?

[@BrosFOURRSpeed]

I showed all that in this video about which side goes to which tube! It's easier to watch than for me to explain again. I couldn't find a similar carb, so I made this one work and it's been fine! This was a secondhand as well, I just went with a new carb and haven't had any issues. tossed the old one away.

[@rosswitte]

Thank you!

[@BrosFOURRSpeed]

No problem!

[@denniswilder3878]

Patriot 1900 same saw

[@BrosFOURRSpeed]

cool!

[@NoahChurch-k1e]

So I have one and I want to put a new carb on it and can’t find one

[@BrosFOURRSpeed]

I've got 2 links in the description for the parts I used.

[@franklee2683]

My pp3416 is not configured like this. The ffilter goes on the right,bigger tube...the nubb goes on the left,on smaller tube. Wtf....

[@BillyLovelace-b8y]

I need crafting 3.3 carburetor carburetor fuel lines installmrnt

[@Lucienlulu-n7c]

si on pouvez traduire en Français se serrai génial

[@BrosFOURRSpeed]

Not sure what language this is.

[@loimt]

It's the french language,and that Poulan chainsaw is similar to the Homelite chainsaw

[@Lucienlulu-n7c]

@@loimt bonjour vous dite que la tronçonneuse poulan est similaire a celle d homelite j ai deux débroussailleuse homelite je peut pas trouver des pièces car un peut vielle vous pensez que les pieces de poulan se monterai sur homelite merci pour les réponses bonne journée a tous LULU

[@loimt]

​​@@Lucienlulu-n7cnot sure 100%but they look like same chainsaw so some parts should match,that saw look like Homelite 4016

[@Accountabanded]

🤔

[@BrosFOURRSpeed]

What?

[@Accountabanded]

@@BrosFOURRSpeed lol

[@jaredmontgomery8934]

First time should have cut extra fuel line off not poke extra in. Could vibrate loose and get damage to fuel line. You got to be carfull if you don't know how to adjust especially high on chainsaws you can actually turn it up too high and blow up a chainsaw pretty easy. Have to know how many rpms it's supposed to put out and have a rpm reader.

[@BrosFOURRSpeed]

@@jaredmontgomery8934 you don’t necessarily need an rpm reader, you can just listen to it and determine from that as well.

[@jaredmontgomery8934]

@Bros FOURR Speed yes I know some people don't know for sure what to listen for and some chainsaws will have in owners manual factory settings how many turns best to be under recommended rpms than over a little. Ones you apply pressure cutting a tree is when tearing up a chainsaw if it's screaming it's too much. Better to be safe than sorry

[@1stPullSmallEngineRepair]

😂 This guy's a joke. Yes u just watched the 1st chainsaw this guys ever fixed

[@BrosFOURRSpeed]

I took something that was broke and made it work properly. Doesn’t seem like a joke to me, you have a video showing how to fix something?

[@epmcdonald4562]

Clue... when announced poleman chain saw!

[@BrosFOURRSpeed]

@@epmcdonald4562 that was it is, not sure your point.. seems pretty petty to make fun of someone fixing something and showing people steps to do that.