Рет қаралды 85,265
Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFP...
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2006-2012 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 ...
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pocket Screwdriver
• 10mm Wrench 1aau.to/ont/1AX...
• 10mm Socket 1aau.to/oJn/1AX...
• Air Blow Gun
• Trim Tool Set 1aau.to/opX/1AX...
• Socket Driver
• Paper Towels 1aau.to/ohm/1AX...
• Brass Punch
• Drain Pan 1aau.to/ogd/1AX...
• Hammer 1aau.to/onP/1AX...
• Pick 1aau.to/ojA/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.