How to Replace Fuel Pump Module Assembly 2011-2018 RAM 1500 3.6L

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@asteel931]

Great video! Didn’t take long to replace fuel pump with help from this video! I don’t have access to a lift so I used ramps on the rear tires which allowed great access underneath. For lowering the tank, made sure my tank was down to about a 1/4 tank so I could move it around myself as needed. I then used ratchet straps placed near the tank straps which allowed ease and a controlled drop to disconnect the lines and wires! Overall, a pretty easy fix for my fuel sender unit failure and saved myself hundreds!

[@coltonyoung7483]

Very helpful. Showed me everything I needed. I appreciate you making this video

[@67hako]

For me, i always like to remove the truck bed to do this job

[@devinnotschmevin]

Helpful video, was able to use this for the 5.7 hemi as well. But now the line loses pressure over night and takes a few extra seconds than before to startup... Issue with the new pump?

[@Workaholic-2]

How much would a job like this normally cost to perform parts and labor???

[@vincentnewton697]

Holly crap i was going to change my sending unit myself but that's alot of lines to take a chance on breaking or not sealing again to set of evap codes damn

[@shantasanders5044]

Fantastic video thank you.

[@Yo-ss5bz]

How long does it usually take to replace an fuel pump to an 2019 f350? Was the fuel pump you replaced showing symptoms of failure?

[@ricalva859]

where is fuel filter located

[@steadymerkinstr8flirkin411]

Can you please tell me what the 2 wire connector is that you removed @3:30 min in the video. When I changed my fuel tank one of the wires in the clip was out, I tried my best to reconnect it. I am just curious what it is for. Thanks!😊