How to Replace Fuel Vapor Charcoal Canister 2005-2021 Nissan Frontier 4.0L V6

Buy Now!
New Fuel Vapor Charcoal Canister from 1AAuto.com trq.video/ia-1...
This video shows you how to replace a fuel vapor charcoal canister on your 2005-2021 Nissan Frontier 4.0L V6. Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing.
Estimated installation time for a professional technician is approximately: 30 minutes
This repair was done on a 2012 Nissan Frontier S 4.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2005 Nissan Frontier
2006 Nissan Frontier
2007 Nissan Frontier
2008 Nissan Frontier
2009 Nissan Frontier
2010 Nissan Frontier
2011 Nissan Frontier
2012 Nissan Frontier
2013 Nissan Frontier
2014 Nissan Frontier
2015 Nissan Frontier
2016 Nissan Frontier
2017 Nissan Frontier
2018 Nissan Frontier
2019 Nissan Frontier
2020 Nissan Frontier
2021 Nissan Frontier
Tools you will need:
• Flat Blade Screwdriver trq.video/obRs...
• Pocket Screwdriver
• 12mm Socket trq.video/ocpU...
• Pliers
• Ratchet trq.video/ocpC...
• Socket Extensions trq.video/ocpU...
• Gloves trq.video/obyE...
• Safety Glasses
• Floor Jack trq.video/oaKa...
• Jack Stands trq.video/oawy...
• Pick trq.video/o9X-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Nissan Frontier 2nd Generation 2005-2021: • Nissan Frontier 2nd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.