How to Replace Headlights 1988-2000 Chevy C/K1500

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 1988-2002 Chevy K1500 Pickup.
• Check here for more videos on the 1988-2002 Chevy K1500 • Chevy K1500 Pickup 198...
This process should be similar on the following vehicles:
1988 Chevrolet K1500 Truck
1989 Chevrolet K1500 Truck
1990 Chevrolet K1500 Truck
1991 Chevrolet K1500 Truck
1992 Chevrolet K1500 Truck
1993 Chevrolet K1500 Truck
1994 Chevrolet K1500 Truck
1995 Chevrolet K1500 Truck
1996 Chevrolet K1500 Truck
1997 Chevrolet K1500 Truck
1998 Chevrolet K1500 Truck
1999 Chevrolet K1500 Truck
Tools you will need:
• Swivel
Subscribe: / @trq
Check out our playlist:
Chevy K1500 Pickup 1988-2002: • Chevy K1500 Pickup 198...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@satyrangel2730]

thank you TRQ LOOK GREAT ON MY 1998 GMC C1500 ONLY 120,000 FIRST TIME OWNER AND EASY 30 + YEARS TOO GO =)

[@alf.8232]

1988 and 1989 are different. You need to make a video on that or correct your years....

[@irishuwould5185]

No reason to remove the grill or the whole mounting bracket. Just pull the two pins up top and be done with it.

[@robletto841]

Nice job!!! I'm ready to do mime 1996 chevy 1500 thank you!!

[@guillermomejia593]

The other 2 screws on the headlight what is that? Not the adjustment that you covered

[@alvindonaldson4414]

I noticed you didn't use a load bar to reduce volts for LED. My lights assembly came with the load bar. I don't understand how to connect them. Can you help?

[@mauricioromero3755]

Please help me ..my led lights is almost the same is that ones ..but my ones have 2 black wires from the lower beam ..and 2 green wires from the higher beam .So I don’t know how to connected..they come whit istrucions but they don’t specifically correct

[@traviscarr6536]

Forgot the step about taking the brush guard off.

[@brittatel]

Hello does the day running lights still works with this assembly?

[@jemerich27]

My 89 k1500 lights are not one peace there separate will these work on my truck

[@billycooper9879]

What is the bulb size for the high beam and low beam lights on these halo kits

[@MrIndian24]

this is hard way to remove headlamps. turn signals yes. there are 4, 5mm long studs at the top of the lamp remove the two studs on each side and the light comes out. at least on my 1993 k1500 that is how I did it. otherwise good info.

[@JorgeMartinez-mj1rj]

By any chance u know the size of the bolts/screws to mount the headlight to the frame?

[@zycarious8136]

what kind of connectors are those? for the wires

[@TheUndertoe]

They are garbage they are what I call a t tap they are not made to be used on vehicles most idiots use these cause they don’t know what they are doing..

[@Grenade825]

What about the seald beam lights?

[@shvahus8865]

Фары 🔥👍

[@juli0cesarrobles738]

💯

[@mauricetheguineapig8802]

VERICLE

[@johnfinegan5934]

for anyone doing this swap, don't use scotch locks like he did...smh

[@johnfinegan5934]

and using a power tool to bolt your grill back in is also a bad idea, use hand tools, avoid cracking plastic

[@marccres6619]

Sorry my truck is way different