Рет қаралды 72,999
Buy Now!
New HVAC Blower Motor Assembly from 1AAuto.com 1aau.to/ib/1AHC...
This video shows you how to install a new HVAC blower motor assembly on your 2008-2013 Nissan Rogue. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obip/1A...
• 10mm Socket 1aau.to/oa8t/1A...
• 13mm Socket 1aau.to/obsf/1A...
• 8mm Socket 1aau.to/oa8t/1A...
• Trim Tool Set 1aau.to/o9T/1AX...
• Needle nose pliers 1aau.to/oC2/1AX...
• Needle nose pliers 1aau.to/oC2/1AX...
• T20 Socket
• Socket Extensions 1aau.to/obsf/1A...
• Swivel
• Gloves 1aau.to/o3c/1AX...
• Safety Glasses 1aau.to/oUm/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.