How to Replace Ignition Coils 2006-12 Ford Fusion

Buy Now!
New Ignition Coil from 1AAuto.com 1aau.to/ia/1AECI00253
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. This video shows you how to install a new ignition coil in your 2006-2012 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 ...
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaTf/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oHg/1AXAA00010
• 10mm Socket 1aau.to/oaDc/1AXAA00017
• 8mm Socket 1aau.to/oaDc/1AXAA00017
• Trim Tool Set 1aau.to/oN9/1AXXX00006
• Hose Clamp Pliers 1aau.to/odI/1AXAA00076
• Needle nose pliers 1aau.to/ovx/1AXAA00051
• Needle nose pliers 1aau.to/ovx/1AXAA00052
• Ratchet 1aau.to/oa52/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaRF/1AXAA00015
• Dielectric Grease
• Paper Towels 1aau.to/ouy/1AXSS00035
Subscribe: / @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@luxurycarkey7207]

Your video's are the best you have saved me so much money...shops and dealerships want a ton of money...I could watch your video all day long keep up the great work...ever loving Bonks on those dealerships labor fees

[@lonesurvivor1949]

Helped me out a lot man thanks

[@lonesurvivor1949]

This so helpful man thanks

[@joethepro7050]

Great video!

[@shorty24405]

What kind of coil is best for ford fusion 07

[@coreytyler343]

Thank I helped a lot good dyi video

[@tamikarhodes7491]

Did u replace one or all?

[@markbeshay]

Bought the parts from your site each coil came ina small cardboard box no plastic covering the coil. When I took it out it was covered in small pieces of cardboard, how difficult can it possibly be to bag them before boxing them or right after they’re made…?

[@myartistryisunbound]

Not the engine on a 2010 Fusion

[@ZachTrumble]

All that to change the spark plugs...😬

[@C0SM1CDUD3]

Not trying to be a stickler, but a quarter turn is 90 degrees. Finish turning the intake manifold bolts 90 degrees, not 45.

[@gordonmcdormand656]

I thought you said 62 foot pound 😫😫😫😫