How to Replace Intake Manifold 2002-2009 Chevrolet Trailblazer

Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ib/1AEI...
This video shows you how to install a new intake manifold from TRQ on your 2002-2009 Chevrolet Trailblazer. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obvJ/1A...
• Phillips Head Screwdriver 1aau.to/obvJ/1A...
• 8mm Wrench 1aau.to/oiu/1AX...
• 10mm Socket 1aau.to/obqk/1A...
• 15mm Socket 1aau.to/obLE/1A...
• 8mm Socket 1aau.to/obqk/1A...
• Air Compressor
• Fuel Line Disconnect Tool 1aau.to/oar/1AX...
• Trim Tool Set 1aau.to/oakr/1A...
• Hose Clamp Pliers 1aau.to/ogv/1AX...
• Needle nose pliers 1aau.to/oGi/1AX...
• Needle nose pliers 1aau.to/oGi/1AX...
• E6 Inverted Torx Socket
• 3/8 Inch Drive Ratchet 1aau.to/obLE/1A...
• Ratchet 1aau.to/obQa/1A...
• Socket Extensions 1aau.to/obLE/1A...
• Torque Wrench 1aau.to/oaTU/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oHA/1AX...
• Gloves 1aau.to/oayI/1A...
• Safety Glasses
• Sandpaper
• Pick 1aau.to/oUx/1AX...
• Sanding Block
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@rogeliogarcia8195]

Really really good vid, makes me feel like I can do this myself. And I certainly will now

[@johnconnelly3674]

Thank you helped me out immensely, had 4 loose bolts, back one was finger tight and one was backed out an 1/8".

[@ZENEN63]

very good video😉! but what happend with the pcv hose?🤔

[@dougboddenjr575]

What do I do with the PCV hose? There was a popup that said you connect it, but there no port for it.

[@Robert-i2r5f]

It is almost imposible to get to the last bolt on the manifold next to the windshield. I can not get out

[@bonegrubber]

13:25 that third bolt at the bottom of the alternator has an AC line that won't allow the bolt to be backed out and it just grinds its hex'd head into the rubber hose and stops.... so is it not being said that I need to undo the ac line??!!! ....swearwords