How to Replace Intake Plenum Gaskets 97-01 BMW 325 Xi

In the video, 1A Auto shows how to remove and replace worn intake plenum gaskets. The video is applicable to 97, 98, 99, 00, 01, BMW 325Xi and similar 3 series vehicles.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oCd/1AXAA00013
• 13mm Wrench 1aau.to/ofo/1AXAA00010
• 19mm Wrench 1aau.to/ofo/1AXAA00010
• 10mm Socket 1aau.to/otE/1AXAA00017
• 13mm Socket 1aau.to/owX/1AXAA00015
• 6mm Socket 1aau.to/otE/1AXAA00017
• 8mm Socket 1aau.to/otE/1AXAA00017
• Needle nose pliers 1aau.to/odT/1AXAA00051
• Needle nose pliers 1aau.to/odT/1AXAA00052
• Pliers
• Side Cutters
• T30 Socket
• Ratchet 1aau.to/oCB/1AXAA00016
• Socket Extensions 1aau.to/owX/1AXAA00015
• Torque Wrench 1aau.to/oix/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ocJ/1AXSS00035
• Pick 1aau.to/ocL/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/oad/1AXAA00280
• Wire Brush 1aau.to/obj/1AXAA00079
For More Info visit us at 1aau.to/h/bNv/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@uhrbexer9134]

Underrated video! Very detailed and precise. It's also very helpful with E39 M54 525 as the parts are almost identical to the M52TU.

[@AndyNav1]

Great complicated job done. What is that lower tube on the CCV connected to. It seemed just hanging down during disassembly an assembly. Isn't it supposed to be connected to dipstick? Thanks

[@victorkaminski1747]

Good job !

[@0HORNMASTER0]

I can’t figure out what this hose is under the intake manifold, looks like it was connected to a red plug that was attached underneath the manifold

[@6speedmanual838]

what was the issue that made you replace it?

[@javiercarrasco1739]

Do this gaskets need rtv

[@payamdivo7040]

Thanks bro ❤️

[@MAX-ns2ey]

I have one hose that I don't know where it goes can you help me 😢

[@Freeknowledge248]

Would this work for a 03

[@zuhrri]

Hello family quick question, what will happen if I put an E46 320i M52 intake manifold on an E46 330i M54, need help please assist

[@navyninjagaming2551]

If it fits then you might be able to run it, but smoke test it when you're done to make sure that the gasket seals. The intake ports may be a different size in which case you may have a problem with weird airflow. Better to go with the prescribed manifold or an upgraded one

[@phuonglbnguyen]

Thank. I looking for the suction vacuum line to intake and breathe fuel tank line to intake for a long time. My car wrong connection 2 pipe rubber for 2 parts. But my car was running normal. I dont know why 😂

[@djjewstavete2325]

Hello from Hawaii...I'm working on a 2004 Nissan xterra i found the code p0442 need help pls

[@1AAuto]

+Dj Jews Tavete We are unable to diagnose the issue you are having but we would suggest contacting a local mechanic for a proper diagnosis.

[@xphantom_pandax1086]

Might as well had blindfolded me and told me

[@1AAuto]

+XPhantom_PandaX Thanks for the feedback!