How to replace LCD screen on Lenovo ThinkPad T490s

www.laptopscre...
www.laptopscre...
This is a guide on replacing a screen on Lenovo ThinkPad T490s
For a replacement process we will need just a plastic pick.
To begin turn off the laptop and disconnect the power cord.
Now we can remove the bezel. The bezel is held in place with tabs
and a lines of glue along the inner edge. Insert a plastic pick
between the bezel and the screen. Move the plastic pick along the
inner edge. Use other hand to unsnap the the bezel. Be careful around
the web camera. The bottom edge is especially heavily glued and requires
some patience to get it released. Place the bezel aside.
Place the screen on the keyboard. Peel off the clear tape securing the
video connector. Using plastic pick open the connector’s bracket.
Disconnect the video cable. Discard the old screen.
Place the new screen on the keyboard. Reconnect the video connector.
Close the connector’s bracket. Secure it with a clear tape.
Make sure that cable states in its place.
Lift the screen up and fit it into the back cover. Test the screen.
The screen is working and we can finish the installation process.
Replace the bezel. Go around the perimeter snapping the tabs back in place.
Close the laptop and make sure the bezel is snapped at the bottom edge.
Turn the laptop on. And we are done!

[@keileanyCruz]

I recently broke the LCD screen to my Samsung Galaxy Chromebook model XE930QCA-K01US do you know when you will restock screens? And how long is shipping usually?

[@zoom3103]

hello i wanted to ask something, so my old laptop (MSI GL65 9SFK-470ID) screen is B156HAN8.0 which is a 144hz, and i replaced it with a NE156FHM-NX2 thats also a 144hz screen, but it only shows 120hz only in the advanced display setting ? can you help me figure out the problem?

[@Laptopscreen]

The specs for NE156FHM-NX2 do list 144Hz as top refresh rate. That usually means that your machine (Windows) is unfamiliar with that monitor and does not have a monitor driver file that lists all of this particular panel's display operating modes. You can either wait for a Windows update to include the newer LCD models or you can use Custom Resolution Utility to force operating modes.

[@TJK50014]

That glue is a PITA.

[@TJK50014]

You forgot, always remove or disconnect the battery. Seen the blue connector spark before...