How To Replace Lower Ball Joint 2003-2011 Mercury Grand Marquis

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@woodsruralguy4317]

Best ever step by step video I've ever watched! Wish he had a service shop near me. Finally! A mechanic I/others can trust to do the repair correctly!

[@EinsteinFiuza]

Great! Thanks for the video. I live in a country where qualified labor is hard to find for american car repairs ...videos like that I can do it by myself. All the best.

[@CobraR1993]

If you have aluminum control arms you have to buy an entire new control arm because you can't press the ball joint out of aluminum because the aluminum could crack.

[@KickinJeff]

If you watch their front suspension videos you will see that eventually everything was changed out 😂😂

[@1celtickiwi]

great vids, good speed and good detail.

[@hustlego4331]

That rim is crazy

[@thephnxtrading]

The 18mm nut on outer tie rod just spins when I try to get it off, I have tried putting box end on nut and socket on hex tip but nothing worked, what to do?

[@TheNoBSZone]

It was luck that the ball joint stud didn't start spinning freely while installing.. This is not always the case. Sometimes you have to stick a hex key inside the socket and tighten with a wrench (really sucks when it happens). The socket strips really easily.

[@MrWontstopthefunk]

Would love to be the lucky guy who got all his car parts replaced just to make this video 😬

[@SebastianBlix]

My favorite part was where those old rusty nuts just came right off with no clamping or heat or cutting or nothing, just zip right off. My second favorite part was where the installation cup fit over the boot but still had enough meat on the balljoint base to press it into the control arm without cutting the boot or bending the base. 😅 Overall good video example of a best case scenario.

[@husamsarof7570]

Hello, how can I order the parts for the Ford Explorer 2007 L4.6 3v?

[@my89mustang661]

Same part number ? for aluminum vs steel lower control arm

[@andy_182]

wait what, this guy made no mention of chagning the control arm...yet he has a new one at the end

[@kodakgringo3171]

Are the rear and front lower ball joints the same part

[@Lilman_yg]

The camera angle is all over the place idk wtf I'm looking at

[@chasiteequick2066]

😮