How To Replace O2 Sensor 2008-2012 Ford Escape

Buy Now!
New O2 Oxygen Sensor from 1AAuto.com 1aau.to/ib/1AEOS00217
The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications. This video shows you how to install new TRQ oxygen sensors on your 2008-2012 Ford Escape.
• Check here for more videos on the 2008-12 Ford Escape: • Ford Escape 2008-2012 ...
This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
Tools you will need:
• 8mm Wrench 1aau.to/oa/1AXAA00011
• O2 Sensor Socket
• Ratchet 1aau.to/oa/1AXAA00016
Subscribe: / @trq
Check out our playlist:
Ford Escape 2008-2012 2nd Gen: • Ford Escape 2008-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@michaeldockham6747]

Need to know how to replace the hard one not the easy one

[@Smokin-kw2hm]

Presty!!! simple. Thanks for the video. I love it.

[@moneycryptocurrency1024]

Thanks for sharing. Can this job be done with the car front on two ramps?

[@carlospena4924]

hello, one question, this is the oxygen sensor 2 of bank 1 of a 2008 ford escape

[@hepagaming6206]

What sensor is this? Bank 1 sensor 2?

[@dcole0614]

Was that the second sensor bank 2?

[@wallacecaraballo3191]

Can you help to find the reverse switch light on 2006 ford escape limited V6

[@jimbo8743]

this dude is bad ass 👍

[@ashleyfoster4928]

I have an v6 08 Ford escape how many oxygen sensors I only see two so far

[@ErikGarcia-vw5xx]

Thanks

[@stephenbuchholz3079]

Which sensor was that? B1 s2?

[@hazlotumismoREPARACIONES]

Porque se debe desconectar el cable negativo de la batería??

[@ciscokid9119]

What Does This Do??

[@lorenjones1456]

I have an 09 escape with a p0130 code. Is this a video of the bank 1 sensor 1 location? Because if so then I am gonna do this myself and not drop 300 dollars on it. And is this doable without having the car suspended?

[@TRQ]

+Loren Jones We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

[@lorenjones1456]

@@TRQ that wasn't my question. This video already states that this applies to 08-12 models. I was curious if this was the bank 1 sensor 1?

[@TRQ]

+Loren Jones No this is not sensor 1 bank 1. The sensor is a downstream sensor, so it is sensor 2. As far as the bank goes it appears to be bank 2 if you have a straight mounted V6. If the V6 is horizontally mounted in your engine bay, then bank 1 will be coming off of the rear half of the engine, and bank 2 would be coming off the front pipes. Bank 1 is always on the 1st cylinder side.

[@lorenjones1456]

@@TRQ awesome, thank you! That helps!

[@rahulajayan5546]

I got a P2196 bank 1 sensor 1stuck/bias on a 2011 v6 . Did the sensor replacement go well?? Is it easy to access? Thanks

[@Shweetleef]

How about the top one ?

[@thecanman5055]

Same how about the top one

[@jimbo8743]

lock and load, boys and girls

[@nyebetancourt4466]

I was quoted $300 to do this!? Ridiculous. If I had a lift, I'd do it myself

[@GreyGhost_40]

I'm calling BS. That came undone to easily

[@dumazecena3719]

Ridiculous