How to replace Oetiker Hose Clamp on Saeco Odea

[@radams009]

You make it look easy you make it look easy

[@ManuXray]

Thanks a lot for this very helpful video ! My machine is working again, thanks to you !!!

[@jimbusse7381]

Great video, thanks. I wish you would do a video on the pump removal and replacement. There must be some trick to remove the pump, those rubber vibration pads or pump mounts, stick like glue to the plastic frame. At least, after 11 years they do. And the Talia-odea service manual doesn't show how to remove the outlet hose connector, it just says "dismantle the pump". Big help, that. Your video points out that if you do it the wrong way, you will break the plastic outlet hose connector.

[@georgeharizanov6094]

Thanks for your video. Very helpful!

[@stephaniemarkov4692]

Thank you Miro, good video

[@alleksandrs]

Thank you for the video, it is very helpful! But why do you use such exotic (industrial) new clamps? Is it possible to use normal worm gear clamps from a DIY store instead?

[@jimbusse7381]

The worm gear clamps work just fine. You have to get them oriented correctly but there's no problem. My Odea's pump output plastic piece has 2 connections, and the worm gear clamp still works just fine.

[@OMGWTFLOLSMH]

@@jimbusse7381 - Agreed. They should have used that type in the first place so you can reuse them. One use clamps are ridiculous.

[@lorihendrickson9692]

What size worm gear clamps do I order?

[@arbutusridge9386]

It worked. Thank you

[@dialruppertOk]

Is it possible to reuse them?

[@UlvsbyV6]

Hey, I have a problem with my Odea Giro. It seems there is no water passing through the boiler. I have disassembled the whole machine and cleaned it. Everything is working fine exept for the water flow, I have no leaks in the machine. If I press the coffee button, it goes through all the stages, then the pump runs for a while, and then it dumps the ground coffee in the wastetray. Please help!

[@helmutneubauer6931]

jeder kann nicht englisch!.

[@miroslavstoicev8821]

Not everyone knows deutsch...

[@Italianstyle69]

Hello, can u help with problem when a talea giro there is no coffee coming out , the red light keep flashing fast, the water comes out from steam valve, is it a pump problem or a blow down valve issue. Thank you

[@OMGWTFLOLSMH]

Stupid design. They should be reusable. Who has these in stock at a regular hardware store in NA? Nobody. Thanks for the video.