Hi Your videos are great and very helpful. My brewgroup keeps getting stuck with a clicking noise. I thought it was the brewgroup motor so I replaced it with a new one but the clicking and brewgroup still gets stuck. Gears look good and are not broken. Any thoughts

Mine is error. Always detect the beans as trash or something like that, and throw the beans. How could I fix it?

saeco talea priming water continous in to the drip tray , there is a way to check , solutions?

top! je l'ai longtemps cherché cette vidéo merci!

I was playing with it for an hour and did not manage to find out how to place that plastic stuff on the grinder. I knew i have to take off the cogwheel but cound not find out how. Thank you so much, you are a blessing :) A piece was broken off the plastic part. And i have also found a lot of water scaling, insanr amount which was clogging it. Now its perfect again.

Hello Miroslav thank you so so much for your videos. You are simply great with your explanations.. Can you please tell any kind of reference of the switch so i can order it? Thank you so much. Cheers from Portugal

Very thorough instructions. Love it. Thank you, maistore!

Many thanks for your video!!! I have repaired my machine by your video! 👏👏

March 23/24: thanks for the video! Unfortunately after changing out the o-rings, the steamer still leaks like before. I even went back and removed the valve again and added a little seaco grease to them to help ensure they seated properly. No leaks from the pump inside…. the machine just leaks from the steam wand when under pressure. Any suggestions on where else to look??

Thank you, very useful and clear. 😊

Thank you, this is one of the greatest repair videos on youtube.

Where I can buy spare in qatar

Thank you very much for the video bit I have another issue with the motor. My motor does not stop or works almost all the time and stop in short time. But this working stage is not a full power turning just like a weaker turning. It if you run the grinder motor tongrind it starts turning harder and louder. When it supposed to stop after grinding it does not support. What isnthe element I need to change in electronic board? Do you have any idea?

The motor is DC right? Can I test it with external 220 V ?

Thank you❤

Can you show how to fix red blinker light

Is it possible to replace the ceramic burr with steel ones?

Hi! Thanks for your video! What is the white electronic part written ROYAL? I don't have 120V coming out of the board.

Hi Miroslav, thank you very much for all your Saeco related videos - I found them really really helpful (and money saving as well :) ) I am struggling with water dripping from steam wand during coffee brewing (even in standby mode) on my Odea machine. So far I've descaled machine 3 times, changed all O-rings in the steam valve, brew unit and related parts, checked flowmeter, even changed the shaft/needle which is inside steam valve from another machine BUT still no luck. The only thing that prevents dripping water from wand is to release some steam (water) before brewing coffee..What do you think I should look at?

My saeco make the coffe too watery, what kind of problem could be?

Здравей къде мога да намеря този клапан? От къде да го купя?

How do I know that the motor is not working?

I've got an interesting grinder problem for my Saeco. I have a video that I'd like to post or send you. Where can I email it?

Англичанин с русским акцентом

Благодаря! :-)

Thank you for this very detailed instruction. I bought one of these machines that was broken and thanks to you i can now disassemble it and replace the board without unnecessary guessing on what to do. Many thanks to you! I appreciate your expertise and knowledge.

I replaced the O-rings but the steam wand is still leaking both from the steam valve housing in the machine and from the steam wand. Should I replace the whole valve assembly, or just the plastic parts?

Dove siete

FANTÁSTICO! Justo lo que necesitaba. Gracias!

Hey man, thank you for these informative videos, you truly are a legend, but I must ask for advice with SaecoLirika, I have a problem with Error code 1, and I know all of the minor fixes to it, for instance, rotating the grindscrew, cleaning the funnel, Yet non of them worked longer than 1 coffee cup... So then I decided to completeyl dissasemble the grinder and clean out all the coffe that was stuck there, yet after that, It still proceeds with error code 1 after a few coffe cups, I am starting to lose hope for my machine

Thank you very much, you just saved my day

Merci !!!!

Thank u🙏

Got the parts today, replaced the motor and the feed chute as you mentioned and all back and better tasting espresso ever! Who knew all this time that chute/funnel part failed and there was 13 years of grinds packed in, and yep...in the motor. Thanks!

Здрасти, много полезно видео. При подмяна на зьбните колела, сега машината пьрво щрака два пьти дозатора, включва помпата и започва да мели. Кьде сьм обьркал ?

Here can I buy the plastic or silicon tube to replace in my coffee maker

Hello! There is the same machine. When you turn it on, the SELFTEST inscription lights up and something tries to buzz periodically... Nothing else happens. The first thing when you turn on is to try to turn the brewing device? As I understand it, this is wear and tear on the gears of the brewer drive ?? (Before that, ground coffee was used for a long time.)

Thank you so much for your clear videos . Was able to swap a grinder between a SAECO Odea and a Talea. With your help .

Aaaaahhhhhh! I'm so happy, I just fixed my Philips 3200 Espresso Machine with the help of this video!! We actually did have the upgraded/reinforced grounds chute and it was broken, so not sure how long it will last, but I'm excited to find out instead of buying a new machine! Thank you!!

You are great. Thank you so much for the video. A small rock was mixed in with the beans. The rock jammed the grinding surfaces and sheared the plastic wheel that holds the grinding surfaces. After watching your video I knew what was wrong and was able to disassemble it easily. Thank you again so much.

Miroslav, your videos are so clear and well explained. Your experience is so valuable. Thank you for your help. Subscribed.

Thank you soo much, it turned out nothing really seemed to be broken but taking it apart like you showed cleaning it up and putting it back together made it work again ! So happy when I pressed the button and a perfect cup of coffee came out. We were about to buy a new machine... no need now. Thanks !

Magic royal

By saeco royal parts

My grinder dont stop grinding, it runs all time, where could be the problem?

THE GRINDS OF THE COFFEE MAKER, ARE THE ONE BELOW AND THE ONE ABOVE THE SAME?

Thank you!

Thank

Can I make this into a non pressurized portafilter my just reinserting the small wire around the top and leaving everything else out?

Hi Miroslav, Thank you for great videos! I have Saeco XSmall machine. It stopped functioning properly as no water is coming out of flow selector faucet and going into the brew unit. Pump is working, boiler also heating up. Water is definitely being taken from the water tank and going through the system, but no water is dispensed through flow selector faucet and all water goes to coffee grounds container. What can be the issue? Thank you