How To Replace Oxygen Sensors On The Lexus IS350 IS250 IS-F

[@aliciaschumann3367]

Man your video was awesome replaced o2 sensor on 2007 is 250 awd,after watching your video took me 20 mins to replace and clear code thank you for the video

[@SlowWhip]

Thank you 🙏🏾 I’m glad to hear this video was helpful 👊🏾

[@PeterHernandez-lg2eh]

Just found this for reference. 2011 Lexus is250 po430 bank 2 sensor 2. Will remove and clean . If code comes back I will replace

[@PeterHernandez-lg2eh]

On driverside

[@reggyforest5299]

@@PeterHernandez-lg2eh DID THAT SOLVE THE PROBLEM LET ME KNOW PLEASE

[@igotchu8824]

So which one is it best to replace if your car giving bad fumes and poor air too the engine

[@seanclarke4061]

thank you very much for this video! I should not have let the dealer do this. Looks nice and simple. I will definitely do the next one on my 06 350 w/205k miles.

[@SlowWhip]

No problem! Yes it’s an easy job, you just need the right 02 sensor socket

[@justanotherhuman1865]

What socket did you use?

[@justanotherhuman1865]

@@SlowWhipwhat socket did you use?

[@SlowWhip]

@@justanotherhuman1865 It’s 22mm oxygen sensor socket. You can buy at your local auto parts store.

[@danyalakbar8416]

Thank you bro for making such a good video. Im having codes on mine and your video really helped me on how to go about this!

[@SlowWhip]

@@danyalakbar8416 You’re welcome. I’m glad to hear this video was helpful

[@MetrioBoomin]

Finally found a video explaining this! Thank you soo much and much appreciated! :)

[@SlowWhip]

You’re welcome. I’m glad to hear this video was helpful.

[@matthewwolfe4509]

Hopefully this is a permanent fix for you! I'm fighting a P0420 as well. I just bought this car too 😢. The O2s are my last easy and cheap try before it's a converter replacement.

[@SlowWhip]

The code went away so I’m hoping that fixed the problem plus I didn’t get any signal from the old oxygen sensors. What’s the mileage on your car? I’ll be damn if I have to replace catalytic converters at 72k miles 😂

[@matthewwolfe4509]

Mine is at 140k miles. These things should last 200k+ as long as they don't have a severe running issue, like misfire or burning oil. Mine is running perfect other than this light. My o2s are reading, but bank 1 is erratic. If your light stays off for 50 or so miles, your probably good.

[@wackydriver1306]

@@matthewwolfe4509 any update?

[@Kokoman709]

Is the location of the connectors on my 2015 Lexus IS 250 F Sport the same as shown on this video

[@SlowWhip]

I believe so. Check underneath of your car, it should be similar

[@robwhiff3411]

I change bank 1 sensor 2 about 6 months back with oem parts and the car just gave me a check engine again on bank 1 sensor 2 , would you know the reason ?

[@SlowWhip]

Check for exhaust leaks. What’s the mileage on your car? Catalytic converters might be bad or clogged.

[@robwhiff3411]

I don’t hear any leaks , the car does have 225,000 but I maintain the hell out of it , I will check that ,I did a y pipe about 2 years ago but I will check anyways

[@SlowWhip]

@@robwhiff3411 yeah at 225,000 miles I would check the catalytic converters.

[@robwhiff3411]

I hope not , I’m going to take a shot and replace the o2 sensor again it’s been a year who knows maybe premature failure, I’m pretty good with maintenance been in the car game for many years but it’s now that I’m getting into Lexus , I have always been and Acura Honda guy and did all my own work .. but yeah I done a lot to this car you would think it’s got 40.000 miles and actually I got it for my daughter at around 200k and it was sitting. For about 2-3 years because of the Covid pandemic and was always maintained by Lexus by owner with Lexus records .. will see how it goes after the new sensor again

[@IvanDeaquino-e4y]

Is both sensor the same part or does each one have its own part number?

[@dataventurer9998]

Thank you for taking time to share your process. I just finished Bank 1 Upstream. When the part for the downstream comes in, I know where to pull the carpet and find the connection.

[@SlowWhip]

You’re welcome. And thank you for watching 🙏🏾

[@robwhiff3411]

Can you share a link we’re you got the RH driver sensor ,I believe is the same for my 2006 is250 .. I have code p0138 Showing high voltage car runs fine and I cleared the code and it came back again

[@SlowWhip]

There’s no link really but the part numbers are 89405-30730. It should work for 2006 as well. Get it on mylparts.com and use code CL5 for 10% off 👍🏾

[@umartoad6751]

Whats the part number for the bank 2 señor 2??

[@SlowWhip]

@@umartoad6751 Bank sensor 2 and sensor 2 are the same oxygen sensors. Part #89465-30730. Make sure to order them from Lexus because there’s a lot of counterfeit parts out there.

[@liquidh5226]

I don't understand why Toyota made it so hard to get to this.

[@dirtydozen2007]

Sweet. I have to do this now. Very well done video. Thanks!

[@SlowWhip]

Thank you 🙏🏽 You’re welcome!

[@sixkdidoslsoxo8839]

I just replaced mine the same way you did but I haven’t plugged in the drivers side because it’s dark out now, anyways I turned on my car so i can move it but it did like a half turn on then just killed the revs but the lights stayed on, I press the start again and it works perfectly the second time. I kept turning it on and off and the same thing kept happening, did I do something wrong? This is the first time this has happened

[@SlowWhip]

It probably did that because you didn’t plug the driver side. The car will act weird if one of the 02 sensors is unplugged.

[@CHAISOICY]

@@SlowWhip that’s funny Ngl lol

[@BonaRasmey]

❤can I change my 02 sensor before it go bad??

[@SlowWhip]

@@BonaRasmey No don’t it. It’s not necessary. You don’t need to change the 02 sensors as long as they are working.

[@danielsantillan8523]

What type of o2 socket did you use?

[@SlowWhip]

I got it from the autozone. I’ll let you know the exact one when I get home.

[@SlowWhip]

OEMTOOLS 7/8 (22mm) part #25249 That’s the best one for our cars from autozone

[@romeosincere117]

Gotta win the war against the OBD2 errors!

[@reggyforest5299]

CAN YOU TELL ME WHAT TOOL DID YOU USE TO REMOVE THE OXYGEN SENSOR PLEASE

[@SlowWhip]

7/8 (22 mm) oxygen sensor socket from Autozone

[@robwhiff3411]

I forgot to ask is it the same sensor replacement for both sides ?

[@SlowWhip]

Yes it is

[@rickyraj4820]

Did you ever change it? I am about to do it he saying the sensor fits both sides

[@theresanguyen4259]

AWD will be different on driver side bank2 sensor2 part number Denso 234-4518.Same sensor ,longer cable

[@marineyacht]

The crowfoot is 7/8 (22mm) ❓🤔

[@Prod.TeaStew]

Where did you order these parts?

[@SlowWhip]

There are a bunch of Lexus dealers that sell parts online but here’s one mylparts.com It’s a dealer in Cali

[@lavere]

I've got a 2017 IS350 n I need B2S2 sensor. This seems too early, shouldn't this be still under warranty?

[@SlowWhip]

What’s the mileage on your car? It might be out of warranty since your car is 6 years old but you can contact your local dealer.

[@rhodtoorare]

Is the passenger side sensor that you replaced Bank 1 Sensor 2?

[@SlowWhip]

Yes passenger side is bank 1 sensor 2.

[@chrisdrivesli5750]

Are you getting the p0138 code? Mine just came on for that. I’m thinking this is what I need to do

[@jake2772]

Nice video, has the code come back on? Did these fix the issue? I’ve got a 2007 GS350 code p0430 that comes and goes. No change in performance or gas mileage either and no exhaust leaks.

[@SlowWhip]

Thank you and the code went away. You might just need new 02 sensors.

[@thugnasty100s]

@@SlowWhipI’ve had this issue and replaced both upstream sensors. In regards to having to remove the battery, Is it normal to have surging RPMs after starting the car and idling for a while?

[@myvtec79]

Thanks man👍your tutorial was useful.

[@SlowWhip]

You’re welcome. I’m glad to hear that 👍🏾

[@muhammadziyapatel7043]

My O2 sensor is very long and my replacement is short, what do I do?

[@SlowWhip]

I think you bought the wrong 02 sensor. The short 02 sensors go to the catalytic converter headers which are underneath of the engine. The long 02 sensors go to your midpipe which are the ones I replaced in the video.

[@kobepower]

ya the wire size should be the same size u have the wrong one.

[@hegotscents8823]

Where did you buy the tool to change them the one I got is not deep enough to get into the cylinder that the spark plug is inside of

[@SlowWhip]

I bought it off Amazon. I did use an extension socket. As you saw in the video, I paired it with my extension socket wrench so it could be long enough.

[@hegotscents8823]

Can you link it please

[@SlowWhip]

@@hegotscents8823 The link is in the descriptions below. Spark plugs socket from Amazon.

[@SlowWhip]

@@hegotscents8823 I’m sorry I gave you the wrong info. I bought the oxygen sensor socket at Advanced Auto. You can find them at AutoZone or Amazon as well.

[@SlowWhip]

@@hegotscents8823 it’s 7/8” (22 mm) that’s best size for our cars.

[@Bartsimpsons0n]

Nice SHADES !!!! Thanks i needed this video.. good looking out

[@liambrown1216]

Good video. I have an 08 IS250 it has started vibrating on idle, revs are now at 500rpm could it the O2 sensors causing this?

[@SlowWhip]

Thank you. Check for exhaust leaks, PCV valve, and mass air flow sensor before you spend money on 02 sensors. You might have a clogged pvc valve, mass air flow sensor or exhaust leaks. What’s the mileage on your car?

[@liambrown1216]

@@SlowWhip Thanks for the reply bro much appreciated, will look into what you've suggested. It's an 08 on 91k miles, I've never had any major issues with it (so far)

[@jenniiiiferxoxo]

Where did you purchase them?

[@SlowWhip]

You can get them at mylparts.com and code CL5 for 10% off. Part numbers: 89465-30730

[@rickyraj4820]

Try ❤❤❤❤rock auto

[@rickyraj4820]

@@SlowWhip the same one fits on both sides

[@SlowWhip]

@@rickyraj4820 yes, same for both sides

[@rickyraj4820]

I ordered Denso from my friend that owns a auto parts store. He is lying. They are two different ones left and right that’s why he doesn’t show you a picture of the part number.

[@TrnPkwy]

Is this where the bank 3 and 4 location is at??

[@SlowWhip]

There are no bank 3 and 4. There’s upstream bank 1 and 2 and downstream bank 1 and 2.

[@carguy9863]

Will this get rid of the P0158 and P0606 codes ? Great video!

[@SlowWhip]

Your 02 sensors might be clogged but check for exhaust leaks first. Try replacing the 02 sensors if there’s no leaks.

[@carguy9863]

@@SlowWhip I replaced the O2 Sensor on the drivers side and it cleared the codes automatically. Thank you for the video, it helped a lot!!

[@SlowWhip]

@@carguy9863 I’m glad everything worked out great 👍🏾 👊🏾

[@yungster-ud7hb]

Did the check engine light clear after the drive?

[@SlowWhip]

Check engine light went away when I started the car. I drove it around for about 30 minutes than I tested the 02 sensors and cleared the history code.

[@CHAISOICY]

@@SlowWhip if I was to just install it do I still have to do that technical code stuff that u described ?

[@SlowWhip]

@@CHAISOICY The code will go away from when you install the new ones, but you can completely clear it out from the vehicle code history if you have the tool to do so. Like techstream or OBD scanner. It’s not something you have to worry about.

[@CHAISOICY]

@@SlowWhip after letting my car sit for a couple days and then driving it around for a lil bit the engine light vsc light and traction lights went away, I did notice some vibrations in the steering wheel and pedals, it’s all gone. Does Lexus just fix it self??? LMAO

[@costantineyoussif6679]

Very nice video man, question is this the upstream ones or the downstream ones you just replaced ? Thanks

[@SlowWhip]

Thank you! Those were the downstream ones.

[@costantineyoussif6679]

@@SlowWhip thank you, keep up the good work 👏🏼

[@Satrolkof]

Why you changed both tho?

[@SlowWhip]

I changed both of them just to be safe.

[@bortiz5260]

Do I have to change all 4 or just 2??

[@SlowWhip]

No just the bad ones.

[@mohammedal-hussaini2976]

Can the right post cat sensor cause P0420 code? Because I have this code

[@isf_mq]

Damn I have p0430

[@theresanguyen4259]

P0420 catalytic converters malfunctions

[@thugnasty100s]

Yes

[@josephf8677]

How many 02 sensors are on this car?

[@SlowWhip]

A total of 4

[@KVIZZZZLE]

your video helped me out, thanks alot

[@SlowWhip]

I’m glad to hear that. You’re welcome

[@williambatuto5693]

Thank you and very useful video

[@SlowWhip]

No problem

[@carloslinan88]

I’m having problems with my O2 sensors for the 3rd time. Something is wrong with Lexus sensors…I’m very frustrated.

[@SlowWhip]

Check if you have a leak somewhere in your exhaust system. Exhaust leak will throw 02 sensors codes. Take it to a shop and have them check it for exhaust leak.

[@carloslinan88]

@@SlowWhip will do brother. Thank you for your incredible efforts putting this video together. ✌🏻

[@SlowWhip]

@@carloslinan88 You’re welcome! Thank you for watching 👍🏾

[@johannmartin520]

Try retreading the oxygen sensor socket if you haven't before. There is a nut u can purchase for about 20 USD that can retread

[@nelsonmaldonado7094]

Do you have rear cat?

[@SlowWhip]

Yes I have a Catback exhaust

[@nelsonmaldonado7094]

@@SlowWhip did you have social media? Facebook or instagram?

[@SlowWhip]

@@nelsonmaldonado7094 Instagram and it’s same name as my channel

[@bernardasamoah8897]

Thanks for all the effort in bringing us this video..I drive a 2007 IS250 and your videos has been very informative..I am from Ghana but I live in Columbus,Oh. Which country are you from?

[@SlowWhip]

You’re welcome! I’m glad to hear that and thank you for watching 🙏🏽 I appreciate it. I’m from Haiti.

[@alejandroflores6819]

Does anyone know how to replace the O2 sensor in Bank 1 Sensor 2 and how to reset the codes without going to the dealer if possible

[@SlowWhip]

Sensor 2 is connected to the catalyst converter so you have to remove it under the hood by the engine. Plus you can go to auto store and have them clear the code for you.

[@alejandroflores6819]

@@SlowWhip do you know a website where I can find the diagram to the sensors? I’ve been trying to find one, no luck yet. And appreciate the help

[@alejandroflores6819]

@@SlowWhip sorry this is for a 2014 is250.

[@nashfuller4642]

@@alejandroflores6819yo did you ever fix it?

[@alejandroflores6819]

@@nashfuller4642 nope still haven’t been able to. I found a video on a 2016 300is that shows how to change some O2 sensors that might help. Haven’t had time to actually go out and check it. My check engine light keeps turning on and off so idk if to replace it at this point or not.

[@_u2ez_318]

I got code p0607 on my 2007 is350 what can this be ?

[@SlowWhip]

This code is ECM “Engine Control Module" it can be exhaust leak, bad 02 sensors, or faulty ECM. I would check for exhaust leak and 02 sensors first if I were you.

[@_u2ez_318]

@@SlowWhip the car has a catback exhaust so I think it might be from a bad weld? Possible o2 sensors, I also saw that it can be a bad battery/ alternator Hopfully no ecm damages cause right now a lot of rain fall

[@donkeycuong]

i dont think this applies to ISF because of v8. so i think it is flipped bank 1 sensor 1 on driver side.

[@SlowWhip]

IS-F has the same system as IS350/250 even though it has a V8. Bank 1 is the passenger side and bank 2 is the driver.

[@furtalance_x]

Wait so I'm getting P0157 and P0158 code for my lexus IS250? is that for these sensors or the ones in the front? (under the hood ones). Please if anyone knows?

[@SlowWhip]

They should be the same 02 sensors that I replaced but different codes. I suggest to take your car to your local auto store or shops and have them test all 4 oxygen sensors. You should check for exhaust leaks as well.

[@mannyduranduran]

Thank you brother

[@SlowWhip]

@@mannyduranduran You’re welcome

[@scottsneed4287]

thank you bro!

[@hassanalhammadi1990]

Thank you man 😎😎😎

[@SlowWhip]

You’re welcome!

[@nipsey3221]

Hello , where is Bank 2 Sensor 1 ?! 😅

[@nazimthomas196]

Hi bro, Is this solution for the code p0420? I wish you have a nice day Cheers

[@SlowWhip]

P0420 can bad catalyst converter, exhaust leaks, or 02 sensors. Mine was for 02 sensors then I found out I have a leak as well. Have a nice day as well

[@nazimthomas196]

@@SlowWhip thank you so much brother

[@SlowWhip]

@@nazimthomas196 You’re welcome!

[@robertmaybeth3434]

Noice video OP alls i can say is, if I'd made this video they'd have to bleep out a few hundred swear words. Also I sincerely hope you slathered the goody with anti sieze before reinstalling/AND soak the old O2 sensor with kroil for sveral DAYS before trying to remove her - the exhaust system invariably does a first-class job welding that #@#%% O2 sensor in place which we only find out when we are there to replace the Got-damn thing that is -

[@seanclarke4061]

dang i feel dumb for letting the dealer do this. I love them for the more difficult jobs I can't do with hand tools at home, but sheeeet they made money for suree🤦‍♂

[@SlowWhip]

Don’t feel that way man, life is a learning process. When I got my first car, I used to take it to the dealer too until I started learning about cars and see how easy it is to work on them.

[@danielestrada7884]

I replaced one of the cats 9 months ago under P420 code, and now the I got code P430…🥺 I guess I’ll try sensor first… 🤷🏻‍♂️

[@SlowWhip]

@@danielestrada7884 check if you have a leak first

[@PeterHernandez-lg2eh]

Same here. Got xtarted out with the Haynes and Hilton's repair manuals. Now Google and watch KZbin to learn and save mucho denero

[@tint6968]

Omg 🤦‍♂️I ratter just watch without listening

[@SlowWhip]

Whatever makes you feel better

[@rodrigovera3907]

Bro don’t be messed up, what’s something good you got from commenting this?

[@MCarter40881]

You’re a bozo. This man just helped you save money and you’re hating.

[@javamobilecrunch]

Mf