How to replace parking brake release handle on a Mercedes Benz C & E class W204 W212 and more models of Mercedes Benz
Пікірлер: 35
@edosullivan71658 ай бұрын
Excellent, no messing about video. Thanks
@unckieherb6 ай бұрын
Right!
@inmortem7 ай бұрын
Thank god you posted this !
@carlovedev6 ай бұрын
Thank you very much!! It's been so helpful to me.
@lulutintin7232Ай бұрын
Merci, j’ai eu le problème grâce à cette vidéo j’ai pu résoudre le problème sur ma E207 cabriolet mercedes merci bien 😊😊😊😊😊😊😊😊
@pauloakley84248 ай бұрын
The hardest part is getting the screws back in while holding the lever out while trying not to pop the mechanism out
@SpacedOutGoatsGaming7 ай бұрын
Legitimately almost smashed the car up when I’ve been doing it in the rain just now 😂
@pkerjay4Ай бұрын
How did you do it? Got to this part 😅
@jozgatkayseri73508 ай бұрын
Super wideo danke😊
@shahruddinmohamad22937 ай бұрын
Thanks a lot.
@mandingowarrior46032 ай бұрын
After removing the two torx screws and I pull out the lever there is hardly any play in it and it comes out half of what yours did. Is there a simpler way to get more slack so I can have enough room to get the cable out of the broken piece..
@rymbougossa74492 ай бұрын
Helloo, what if that grey wire snaped is the procedure more difficult or I can replace it myself?
@AgusUgraSАй бұрын
Thanks for explaining, is it similar with W124?
@mercland6434Ай бұрын
Hi, yes similar but as I recall on a w124 the under dash panel has to be removed to replace.
@AgusUgraSАй бұрын
@@mercland6434 alright then, thanks for replying 🙏💪
@barjunkies15 ай бұрын
I carbon fiber my whole inside jus want to change pulling break I have carbon fiber 1 will this help
@karandeepsingh66665 ай бұрын
I just applied my emergency brake and i heard a click and my handle popped out of the dash. It not going in anymore and the emergency brake won’t hold no more. Any possibilities ?
@nesscog22878 ай бұрын
Hi. I was stupid enough to press my P-brake during -15°C and something happened since the wire on the release handle jumped out and the handle itself. Now the P-brake wont engage on +7°C (i only did the 3 clicks with the hand) i mounted back the wire in to the release handle and it just stays pulled out. There is slight resistance on the wire so i guess it did not detach or jump off where it sits. What could have happened? Should i tried pressing the p-brake harder with my leg?
@TheCaptScarlett6 ай бұрын
Judging by other parking brake videos it;s a sticking spring/wire that needs WD40/grease _ i'll add a link
Hi, do you know which size torx screwdriver you needed? I used t10 and t15 but they were too small.
@mercland64345 ай бұрын
T20
@robaydin6 ай бұрын
hi my issue is the handle is loose now. is the cable supposed to be behind the hook inside the dash?
@mercland64346 ай бұрын
Yes!
@christianhunter13668 ай бұрын
Any link to that part?
@christianhunter13668 ай бұрын
Sourced part from my local Mercedes dealer. £14. Replacing part is exactly as the video details. Putting screws back In can be a little tricky so a second set of hands is handy. Great video, super helpful. Thanks 🙏
@mercland64348 ай бұрын
Thanks! Yes it is best to buy from dealer. Cheap and correct first time!
@squidbeard56164 ай бұрын
people don't use the park brake? so what, they let the entire weight of the car rest on the gearbox while it is in P ?? that can't be good for the gearbox.
@mercland64344 ай бұрын
Unfortunately most people aren’t mechanically sympathetic as they aren’t aware. These people use phrases such as “turning my car on,” or “my car won’t work” or cannot differentiate wheels and tyres.