How to Replace Parking Brake Shoes 1999-2003 Toyota Solara

Buy Now!
New Parking Brake Shoe Hardware Kit from 1AAuto.com 1aau.to/ia/1ABRX00011
Parking brake shoes are an important safety measure for any vehicle, and need to be replaced on a regular schedule just like other brake components. This video shows you how to install new parking brake shoes and hardware on your 1999-2003 Toyota Solara.
Check here for more videos on the 1998-2003 Toyota Solara • Toyota Solara 1st Gene...
This process should be similar on the following vehicles:
1999 Toyota Solara
2000 Toyota Solara
2001 Toyota Solara
2002 Toyota Solara
2003 Toyota Solara
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaJ/1AXAA00013
• Pry Bar 1aau.to/oF/1AXAA00020
• 12mm Socket 1aau.to/oaA/1AXAA00015
• 14mm Socket 1aau.to/oaA/1AXAA00015
• 21mm Socket 1aau.to/oW/1AXAA00043
• Brake Caliper Hanger 1aau.to/oc/1AXAA00084
• Needle nose pliers 1aau.to/oo/1AXAA00051
• Needle nose pliers 1aau.to/oo/1AXAA00052
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oaX/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oag/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Floor Jack 1aau.to/oM/1AXAA00068
• Jack Stands 1aau.to/oL/1AXAA00065
• Wire Brush 1aau.to/on/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Toyota Solara 1st Generation 1998-2003: • Toyota Solara 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@mushroommike5970]

Dude someone give this man an Oscar he is the best! Helps me with all my fj maintenance and somehow adds a way too make me laugh in every video while doing soo love you man

[@andqt]

Thank you so much sir. I learned a lot. My old toyota got new brakeshoes and it runs perfect. Have a woderful day😊

[@maxenielsen]

Thanks for your video!! I’ve found two exploded assembly views that show the bottom of the U-bend in the retaining pin near the axle. The video shows it oriented away from the axle. Before watching the video I had already assembled my brake with the bottom of the U-bend toward the axle because it seemed the bend is there to clear the actuation lever. When I saw the video I thought I’d better check. Thanks again!

[@owenst.edward3412]

Great instructor video

[@tamlai2786]

great job man

[@IvanHernandez-vo4jx]

Thank u much that helped a ton!!

[@stevewaterfield4862]

Thank you.

[@damianojeda7017]

My green spring isn't the same. One end is vertical and the other is horizontal. Yours is parallel. Making connecting it easy

[@armchairtin-kicker503]

Assuming that he switched to the LR after briefly working on the RR, shouldn't the wear-indicator be at the bottom? From what I have researched, the wear-indicator should be on the leading-edge of forward rotor-rotation. Accordingly, for rear-facing calipers, it should be at the bottom and for front-facing calipers, it should be at the top. (View "Here's the correct way to Change Brake Pads & Rotors in a car " on the "Junky DIY guy" YT-channel.)

[@JohnDoe-gz8dw]

Any video for the 04 - 08??

[@boomer198008]

What is that part called at 10:51? It doesn't come with the kit and I don't have the old ones

[@anderswincentson3864]

Help, plz! When I put in the "rear" pin it sticks out to long ( it touches the centre of the wheel) do I turn it wrong???

[@JTapia512]

Did you figure it out

[@mikezaldivar9796]

Wouldn't it be easier if you remove the hub bearing?

[@A_Renaissance_Man]

Yea, he did not read the manual first.

[@kevingriffin1376]

DIY removing the bearing? Easier? LOL!