How to Replace Parking Lights 2007-2013 Mini Cooper

Buy Now!
New Parking Light Set from 1AAuto.com 1aau.to/ib/1ALP...
This video shows you how to install a parking lights on your 2007-2013 Mini Cooper. Parking lights may not be as necessary or often used as they once were, but they still serve a function in both safety and appearance. TRQ replacement parking lights are designed to fit your vehicle, just like the original.
This process should be similar on the following vehicles:
2007 Mini Cooper
2008 Mini Cooper
2009 Mini Cooper
2010 Mini Cooper
2011 Mini Cooper
2012 Mini Cooper
2013 Mini Cooper
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• T20 Socket
• T30 Socket
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Drill
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@steveanthony161]

Had to replace my parking light didn’t want to go down the route of bumper removal, I followed this method and worked well was a bit of a fiddle moving the water bottle to the right position to get access to the screws but an effective way without removing bumper 👍🏻

[@Rednerb64]

What are you up to? Turn the wheel to the right ,undo the big round panel you keep ignoring by turning 90° and change the bulb or light unit that's right behind it. A proper song and dance for a 5 minute job.

[@englishgrrl]

Just remove the round plastic cover to access the bulb. No need for all of this. Way too much for a simple bulb replacement

[@stixdrones7720]

The round plastic piece on the liner gives you tool free access. This is way overboard

[@sullivan2524]

Any tips on how to get the light out around 3:35 mine physically won’t come off no matter how hard I try

[@DrawnByPencil]

How much different is this process on a 2015 Mini Countryman?

[@ngri]

The round plastic piece on the liner gives you tool free access. This is way overboard!

[@peter6782]

Jesus !!! all that just to change a bulb ? good grief.