How to Replace Rack and Pinion Assembly 1996-2002 Toyota 4Runner

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@FlorentinoRebuildingCo.5644]

Well I did it. I replaced the rack and pinion on my 4Runner as mentioned here in your comments section about 3 or 4 weeks ago. I literally had my laptop next to me as I replayed your video. Your torque specs call outs as you reassemble everything was indispensable and worked like a charm for me. My 4Runner came out great. Thank you, thank you , thank you. You are amazingly AWESOME.

[@TRQ]

+Florentino Rebuilding Co. Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@tonygrace2322]

Thank you very much for this great video! I called the local dealership and their estimate for this job was $1800 which meant it probaly would have been closer to $2000. After watching your video a few times, I decided to replace it myself. With some patience and many references back to the video, I was able to complete the Rack and Pinion replacement on my 1998 Toyota 4Runner over the weekend. The part and tools needed cost me about $600. The alignment afterwards cost me $120. Thank you very much for the knowledge and the huge savings!

[@marshallkain8788]

Great video. I just replaced mine, and I'd like to leave a few notes other DIYers. Buy a return line end adaptor. I didn't because I excreted to reuse the old one. That mistake made the project take an extra day. Go ahead and take both skid plates off. This simple move makes the powersteering lines more easily accessible.

[@KullenBridwell]

Being a mechanic and never doing one of these on a Toyota, your video is very detailed and instructive! Helped me do the job in about three hrs. Thanks for the video, and keep it up man!

[@FlorentinoRebuildingCo.5644]

I'll be replacing the rack n pinion on my 2001 4Runner in 2 weeks. I will use your video as my step by step. Very enjoyable video. Very thorough....so I subscribed to your channel.

[@chiruloco13]

Excellent video, it helped me do a job that it would cost me $1,200 at the shop. There are two things I would add to it: alternate ways to remove tie rod ends and removing the tin plate underneath for better visibility and access to nuts and bolts to be removed. Banging the tie rod ends with a hammer to cause them to drop didn’t work I had to borrow a tool from a friend to achieve this step, where I got stuck the longest trying to figure out how to remove them. And removing the tin plate completely made things a lot easier. Thank you for sharing this video!!!👏🏽👍🏽

[@Broozer21]

Thank you for this series, it’s great to see a Toyota comparable to my northeast 02 Tacoma. The rust is strong w this one

[@dbm1productions]

Great video! Very detailed. Excellent lighting and camera placement. One of the best I have seen. Thanks!

[@ferrarriohh]

This was a good crash course for me. A few yrs ago I had my old ‘99 RR body mated to a younger, rust free ‘01 rolling frame. Bought a new rack & pinion, in the quote my shop claimed I should get new outer tie rods. From this video, I’m really not seeing why. But I see I can pick them up much cheaper than what they tried to charge!

[@ronlullie7154]

Great video! A simple but very effective tutorial. Thanks!

[@mimilove1300]

Awesome video. Very very detailed on every step-by-step. We were stuck on the installation and you helped us through. For sure subscribing to your channel!! 👍👍

[@clgoose1646]

Excellent video. Thanks! I also bought the VNSH holster. Looking forward to trying it out.

[@richarddiaz8248]

Thank you very much for your expertise when I disconnected the lines and back I forgot which one went where😢

[@victormolina6860]

This is a great video,thanyou.

[@godrules8040]

Great video by the way

[@davidl.579]

Nice grips on the line

[@AmericanGutierrez18]

Did you just replace the power steering line after you hacked it to death with a saw? Would love to know if you “repaired it” And how

[@grizzy909]

Are the torque specs the same for a Toyota Tacoma this year as well?

[@joelrush953]

Is this for a 2wd or 4wd, is there any difference in the two?

[@davmid]

Great video. Thanks for sharing it!

[@godrules8040]

Did you need to use the two new o- rings that came with the new rack?

[@rx74u]

Removing the bottom plate is a lot easier..I just did my truck

[@zacharywarner1678]

Outstanding video thanku!

[@KM-yh4gh]

Excellent video...How may hour would you say it took you to complete the entire job I understand this is a video so an estimated time to do it? If an experienced mechanic were to do it, labor time? Thank you.. I am in the Houston area for any of you mechanic who knows how to do this and want to make extra money.

[@bell9620]

All I can say is buy OEM on this one. Aftermarket ones don’t last. Think I paid around 600.00 for steering gear. Along with OEM tie rods. Got 265,000 on my 2002. I plan on keeping this Houston beauty a longtime.

[@brettsroberts]

Thank you for your great video!

[@bongies42]

Great video but wish i knew to have a 2 jaw puller for stuck tie rods..

[@hmongBoYz]

Do you guys do 2003 4runner or 4th gen 4runner rack and pinions? I would love to see you guys show us how to replace them too.

[@TRQ]

+@hmongBoYz We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

[@davidl.579]

The line is flexible

[@Tac0_489]

Where did you get 96ft-lbs for left bolt my service manual says 153..? It says 123 ft-lbs for the right side like you have though. Im doing this on my 3rd gen rn so im just curious

[@thediddlefiddler5569]

Im shopping for a Toyota tool kit to do this. Any recommentations?

[@brandtall9639]

How did you know it needed replacement?

[@fn6553]

How much play dos the new rack have?

[@americanpatriot7508]

How different is it to change this for a 2002 highlander?

[@efil4kizum]

2:17. ... WHAT!? Are you doing Here??

[@DanielMartinez-eh3rl]

Do y’all have a video on how to replace the charcoal canister on this model

[@TRQ]

+Daniel Martinez We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

[@graaat5557]

Can someone who has never done this do this?

[@92mazagua28]

Gracias ,thank you

[@swagyguy1013]

My steering wheel locks when i try to turn it

[@jakechamberlain2206]

Ima save someone the boneheaded mistake i just made watching this video If you are gonna cut the pressurized line like this guy did just know you gotta have the replacement line... It aint just a fitting you can make up in your garage.

[@JoseGomez-tv4bb]

Good gob, thank

[@TRQ]

+@JoseGomez-tv4bb Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@davidl.579]

Don't need the wood wood

[@rodolfomolina4623]

Este man el mismo que saco dise que es nuevo solo le paso el espray cromado ahi semira clarito talbez el ule nedro le cambio

[@vonito7408]

✌️☝️👍

[@Frank-q4o]

Watching this made me cringe. So many things were done wrong it's pathetic. It would take me a half hour to explain everything. Do not try and do it his way!