How to Replace Rear ABS Tone Ring 2005-2010 Chrysler 300

Buy Now!
New ABS Tone Ring from 1AAuto.com 1aau.to/ia/1ABES00146
This video shows you how to install a rear ABS tone ring on your 2005-2010 Chrysler 300.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa7e/1AXAA00013
• Pry Bar 1aau.to/oKE/1AXAA00020
• 15mm Socket 1aau.to/oa9E/1AXAA00015
• 18mm Socket 1aau.to/o6a/1AXAA00043
• 21mm Socket 1aau.to/o6a/1AXAA00043
• 32mm Socket 1aau.to/ob7/1AAST00003
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oaI/1AXAA00288
• Brake Caliper Hanger 1aau.to/ogV/1AXAA00439
• E12 Inverted Torx Socket
• Ratchet 1aau.to/obki/1AXAA00016
• Socket Extensions 1aau.to/oa9E/1AXAA00015
• Torque Wrench 1aau.to/oaqr/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oyg/1AXSS00035
• Gloves 1aau.to/oEK/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/oys/1AXAA00343
• Sandpaper
• Center Punch 1aau.to/ojU/1AXAA00055
• Chisel 1aau.to/ojU/1AXAA00055
• Floor Jack 1aau.to/oSV/1AXAA00068
• Hammer 1aau.to/oM9/1AXAA00091
• Pick 1aau.to/oF2/1AXAA00037
• Wheel Chocks
• Wire Brush 1aau.to/oqG/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@TugHaines]

whenever I watch TRQ videos I'm reminded of how grateful I should be to have gotten my Chrysler out of the land of salty roads 4 years ago and into the desert. It has 122k miles so I have been doing a lot of long term wear-n-tear maintenance and there is very little rust to contend with.

[@delta7_actual]

Changed my rear bearings but was unaware of the Tone ring. I scraped a bunch of gunk out not knowing, but can imagine it was the 13 year old tone ring inside. I also installed new wheel speed sensors. After installing my new bearings I had the abs light, esp etc. with codes showing that the VSS was not detecting any wheel speed. Ordered a set of the rings, Hopefully this fixes my issue! will update if it does. Thanks for the great videos.

[@carlosmafia]

Nice work thank you for the video.

[@averymount2237]

awesome I didn't know if the tone ring was part of the hub or not , but now i know Thanks

[@3brandon]

I’ve had nothing but trouble getting the tone ring on and when I do it just comes right off

[@shatnersufolanded7785]

Will this fix a new rear sensor that's still not reading anything and finally turn off my abs code.

[@jremech]

Thanks!

[@etyrnal]

so what you're saying is is the axle nut just only needs to be snug. got it. no torque spec. right on.

[@timhowell1220]

Wow what a rusty mess. Glad I don't live in a snow and ice zone where they spread salt! Question - is it normal for the car to go into limp mode if an ABS sensor goes bad? Thanks

[@darkflames77]

i cant get to those hub bolts like how do you have so much room

[@etyrnal]

axle nut torque??!

[@joemoonraker]

Not one of those things went as planned on my old rust bucket. 🙄

[@amracingent]

New ring are install, by my tool, test 2 new senser from Dealer Chrysler, and at the end.. have no signal, no cruise control no ABS, and track control.... So stay the same in fault... Bad

[@exexexe]

Funny but 2024 is the time to change our 200? something in the same time. 15 years of duration part. 👍👍 It was a Daimler/Mercedes part. Remember it is due to change the 2 sides. 👀