Рет қаралды 15,710
Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ib/1ABC...
This video shows you how to install new rear brake calipers from TRQ on your 2003-2007 Honda Accord. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oYI/1AX...
• 10mm Socket 1aau.to/obm9/1A...
• 12mm Socket 1aau.to/obHI/1A...
• 14mm Socket 1aau.to/obHI/1A...
• 19mm Socket 1aau.to/oapA/1A...
• Hose Pliers
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ovC/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obK7/1A...
• Torque Wrench 1aau.to/oaQj/1A...
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oash/1A...
• Safety Glasses
• Silicone Brake Parts Lubricant
• Drain Pan
• Floor Jack 1aau.to/oaeq/1A...
• Jack Stands 1aau.to/o2Q/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.