This would apply to all the LX chassis Mopar vehicles(Challenger, Charger, 300)as they use the same setup in the rear. Great tutorial!
@riccochet7043 жыл бұрын
Also a good idea to adjust your parking brake while you're in there. With everything back together, wheel back on and still jacked up off the ground give the wheel a spin. If it spins freely with zero resistance you'll want to extend the adjuster. Just enough to where there is just a little bit of resistance. Like where if you give the wheel a good spin it'll rotate 3-4 times before coming to a stop on it's own. You want that little bit of resistance so the parking brake shoes seat themselves in to the drum the first couple times you drive it. The resistance will go away after their seated. It just ensures you're parking brake will function properly at 100%.
@scottwalters8598 күн бұрын
Perfect video! Thx.
@brentsmith45283 ай бұрын
I have a used Ram that I am doing the rear brake so I watched your video and looked at the parts that you use.What is your take on the quality?And are you happy with the wear that you got from these parts , thanks
@mr.gjohnson499112 күн бұрын
What typ of cordless wrench are you using
@wsvitak7 ай бұрын
Just did the same. Did front pads and rotors and still have shake. 😒 rear don’t look bad at all, fronts were pretty rough, dents on edges etc, but on to the rear. I always like to watch a quick vid to make sure there’s nothing special, otherwise it’s usually pretty routine. Thanks for the vid.
@TrentGustus11 ай бұрын
This is blind I wish you would have made notes on which way the adjusters turn to release, I can't get mine off, and I have no idea.
@rbcoutdoorsandrcs20215 ай бұрын
Do I re adjust the star mechanism back to tight after new rotor is installed ???
@martinkandler5444 Жыл бұрын
😊Thangs for the video it helped me well Greetings from Germany / Brandenburg
@joelortuno96975 ай бұрын
Which way does the cog wheel have to be turned to loosen on the rear driver side?
@henryg6833 жыл бұрын
Thanks for sharing this info very informative learning something new was awesome 😎 I’m still having drums on my truck so if I upgrade I’ll know what to do thanks to you!!!!!! You thinking of a older body style for the plain hemi motor??? Hopefully you put the other hell motor in a single cab newer truck!!!!!
@BoostedMotorsports3 жыл бұрын
That’s the plan!
@blackbeardlivesagain3 жыл бұрын
Thanks for another great how to video!👍
@newfiebob5611 ай бұрын
What year is the truck? Thanks
@davidmoshe58642 жыл бұрын
Thank you so much really helpful
@Threefiftylegend2 жыл бұрын
What is the abs sensor. Related to in the actual hub what its it reading. The wheel axel or the rotors
@ryjchurchill3 жыл бұрын
Great info. Doing this soon also.
@Bizzair1990 Жыл бұрын
Just did brakes on the front of my Ram and still have a bit of a pulsation. Rear rotors are pretty ridged and looking ugly, so time to do those too I guess lol
@alexarmstrong1134 Жыл бұрын
Thanks 👍
@_DrDrakeRamoray Жыл бұрын
Ram has a setting to release parking brakes. Under brake service in settings on uconnect.
@victorortega271811 ай бұрын
So you do this and you don't have to do it manually?
@_DrDrakeRamoray11 ай бұрын
@@victorortega2718 Apparently. I have never done it before but it is for brake servicing. If you don't do it then it's difficult to change rotors because the parking brake will be auto engaged.
@benskalitzky39706 ай бұрын
Glad I saw this thank you sir
@willmatic843 жыл бұрын
And thats that 😋👌🏼 💯% new
@gaylecoombs5510 Жыл бұрын
So how do you know if your spinning the parking brake mechanism in the correct way
@michaelohara21619 ай бұрын
The factory uses yellow thread locker. If it has blue it was worked on.
@Buggen-Out-Yo2 жыл бұрын
Didn’t work for me rotor won’t come off. Adjusted the e brake, north east driving.
@foxfire8284 Жыл бұрын
Ok so you may have just cleared up why my brake rotor won't come off my 2002 dodge ram 1500. I didn't know there was a drum brake mechanism and i would have just kept hitting and hitting it. Btw I'm down in Texas and we still do use road salt on our roads, although mainly on the highway.
@Official_Dominatus Жыл бұрын
Trying to take off the 21s. Assuming its standard but you showed nothing and spun them off without a single sweat. Damnit
@da_truckingp74213 жыл бұрын
Why not slotted and drilled rotors?
@brown52523 жыл бұрын
Because they're over priced and junk.
@ScottStanford-z5y Жыл бұрын
👍
@stilltuckered Жыл бұрын
That far into it, may as well replace the parking brake. One and done.
@master_vator2 ай бұрын
Doing this sunday, im from ns so ya, it will be seized, to death
@safemoonswayze55523 жыл бұрын
Hands down best how to on that stupid parking brake.