√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@rje55642 жыл бұрын
Your one of the best mechanics I’ve seen on KZbin. Man or woman. Very thorough and well spoken. You know your stuff. I wish you worked in my area. You would be my mechanic! Your a credit to the auto service industry. Keep it up girl!
@CWK0903 ай бұрын
I'm not an ASE mechanic but I've been doing brakes for myself and others for over 50 years. Regarding the caliper slide pin with the rubber sleeve, that pin is normally the trailing pin. I say "normally" but I have never seen a caliper slide pin with a sleeve that is not the trailing pin. It doesn't matter if front or back or left or right side of the car. If the caliper is aft of the axle, the trailing pin is on top, as in this video. To explain leading vs trailing, if you were to put a mark on the rotor and rotate it as if driving forward, the leading pin is where the mark first enters the caliper. The rubber sleeve is on the trailing pin.
@alexclary39695 жыл бұрын
This is the most thorough brake job I've ever seen. Not just on youtube.......ever.
@1AAuto5 жыл бұрын
+Alex Clary Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@daviddelavega86362 жыл бұрын
Mount the caliper on the bottom pin then mount the bracket. Flop the caliper open, hinged on the bottom pin to install the pads.
@TyHudson42 Жыл бұрын
Excellent job and instruction😎🖖🏼
@daniells713 жыл бұрын
The first time I've seen someone do a brake job the way I was taught in school. Most people just swap parts and then end up having reduced performance or early wear. I've lost count of how many times I've had people come to for help complaining that their brakes are either noisy or soft or both, after getting a brake job.
@brmillgr Жыл бұрын
Nonsense
@billmillward45954 ай бұрын
Awesome video ❤❤❤❤❤❤❤
@whatthefox3022 жыл бұрын
What a great way to waste time and charge the customer more money lol no damn need to the opening of the bleeder screw 😂 open the reservoir cap and use the brake caliper tool to push the piston back in. Remember fellas DO NOT OPEN THE BLEEDER SCREW! Unless you wanna have to start a brake bleed job to be 100% sure of no air in the system. She gets an A for effort, but this hard to watch cause of how it began with that bleeder screw.
@ronaldomarcelino85605 жыл бұрын
Thanks for the video it helpful a lot,my question is,even in the front brake the slide pin with the rubber boots goes on top?
@user-ef4gb6lp4d3 ай бұрын
Is the vehicle in park ? Didn’t think the wheel would move if in park?
@hoeurd5 жыл бұрын
Thanks for this tutorial video. You make it look so easy! Keep up the good work. Quick question: Do you know think any Nissan dealer can do this within 2 hours of labor? I'm thinking about buying those Nakamoto break pads and rotors then asking my dealer to install them. Asking me 1K for the brakes/rotors and labor is just insane!
@1AAuto5 жыл бұрын
+htnotc Typically they would charge 2-3 hours so whatever their hourly rate is would be what you pay. Check to see if they have any coupons through that dealer some places offer that. Call first and make sure to get a confirmed number and the person's name. Hope this helps!
@cmect52 жыл бұрын
I have an AWD 2009 Nissan Murano. When adjusting should I feel a drag or shouldn't I?
@cmect52 жыл бұрын
Wow. Still waiting....
@wuxushalion4 жыл бұрын
I noticed that you opened the brake bleeder valve. I this required or not necessary? And if is necessary, why?
@ciresound3 жыл бұрын
I have never opened the bleeder valve when doing anything with the brakes . Once you open that value going to have to bleed all the brakes
@shempshempleton47462 жыл бұрын
That was fantastic. Thank you VERY much!
@johnmiller92193 жыл бұрын
15:00 every video i have seen they put paste on the surface of the clips (or the pad area that makes contact with the clip) . I am very confused about this and am about to change my brakes. Also when loosening the bleeder screw did air seep into the system?
@troquiandonw66333 жыл бұрын
I always believed that you should not loosen the bleeder screw unless someone was putting pressure on the brake pedal, or it would have air going in to the lines...
@Thomasjcolbert824 жыл бұрын
My only other question is, it’s not easier to take the cap of the master cylinder instead of opening the bleeder screw? Just curious.
@1AAuto4 жыл бұрын
+Tom’s Video Collection We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
@topcatz110 ай бұрын
im confused you just pulled off the disc brake rotor and then your showing brake shoes under the rotor??
@1AAuto10 ай бұрын
+R Denn You may be referring to the emergency parking brake shoes.
@JJ-dz6oj5 жыл бұрын
Thanks for the great video, I'm about to do this to my car. Do you recommend coating the back of the brake pads with CRC Disc Brake Quiet? I used this on my F-150 and seemed to eliminate the squeaks.
@1AAuto5 жыл бұрын
+JJ We would suggest adding the brake quiet as it will eliminate the noise coming from them. Thank you for your feedback!
@mikenaugz88 Жыл бұрын
if your calaper was seezed, could you just take the breaks out and use the car with only 3 wheels with breaks????
@curtfloyd50684 жыл бұрын
Hi, i have a stuck rotor. Does this also work for 17 model or does the 17 have a hidden screw to hold the rotor?
@1AAuto4 жыл бұрын
+Curt Floyd We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@fabolousg4ever5 жыл бұрын
wonderful video but shops aint doing none of that they getting the car in and out slinde the pads in and out and push the piston in and they sending the car on the waygreat video though once again.
@1AAuto5 жыл бұрын
+MODS FOREVER Thank you for your feedback.
@jaymeschappy19655 жыл бұрын
MODS FOREVER exactly
@michaelssong875 жыл бұрын
You say not to add grease/silicone paste to the top of the retainer clips for the rear brakes? Is that only the recommendations on rear brakes? Many people add greaseor paste to the front pads.
@1AAuto5 жыл бұрын
+michaelssong87 You can add brake quiet to the pads to eliminate noise.
@michaelssong875 жыл бұрын
1A Auto Parts I understand that. I’m talking about the rear brake retainer clips. She says not to add grease/paste to the top of the clips. Ive never heard that before.
@jaymeschappy19655 жыл бұрын
michaelssong87 I use permatex copper antiseize on the slide guides, or your brake pads will stick.
@user-wk8gg2uj8b3 жыл бұрын
Silicone paste is the best and recommend,it won’t burn at high temp and won’t eat rubber boots like grease.
@rube8145 жыл бұрын
Will this work for a 2017?
@anahernandez59684 жыл бұрын
Great video!! What’s the size of the bleeder screw?
@jerrittglaser3 жыл бұрын
10 mil
@anahernandez59683 жыл бұрын
Thank you, actually found out rear brakes bleeder are 8mm and front are 10mm.
@Thomasjcolbert824 жыл бұрын
Are the 2014 Pathfinder brakes the same way? I could not find a video.
@1AAuto4 жыл бұрын
+Tom’s Video Collection It may be similar, but at this time we do not have an install video for your vehicle. Thanks for checking us out!
@wifredocancel73852 жыл бұрын
Nice job, but next time I really appreciated you, sow please put you a mask on for you healthy!..!