How to Replace Rear Brakes 1999-2007 Chevy Silverado

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: • Chevy Silverado 1999-2...
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pry Bar 1aau.to/oa/1AXA...
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXS...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@jamescavin543]

Ú hhc ģ fr

[@UnknownUnknown-se1qu]

Would've been great to now the socket sizes😑

[@Stevesbe]

The parking brake is the worst design in history

[@poorgrower]

They wanted to feed the economy. Just build another

[@dustinskeen7885]

Adding what size sockets you need to do this would be really helpful.....that's the only thing I needed to know 😐😐😐

[@lonnycactus5593]

I love the way brakes work. When I was a teenager and my friend was getting into women. I knew thats not for me. There was something about cars that got me Randy. I would buy auto magizine and be in my room for hours. I love the way brakes smell and the rotors and uhhh everything.

[@jeff7389]

Was disappointed to find out...after market brake parks are no longer made in america, that inludes the parts used in this video....made in china. When did that happen?

[@Busabuck100]

Wonder how many garages do that cleaning and greasing ?

[@FrancisZepeda-po8je]

How much does it cast to reinstall drumspads and what ever comes with it

[@davidcruze111]

Do the fronts. You guys are my favorite to watch when it comes to working on my Chevy.

[@20x20Ghost]

You Rock!!! learn something new every day and life is easier thanks for all of your amazing videos you have saved me much agony and frustrastion

[@JerryEchelbarger]

I got leak coming from the rear end. To the brake area is there a bearing that could b leaking

[@Mahkwa]

Do you need to open the lid to the master cylinder when replacing very worn brake pads with new pads?

[@terryhollingsworth]

Very well-made video. Right to the point and no BS!

[@gregoneill1495]

Parking brake!

[@randomshortz17]

Give it a bonk

[@TactMod]

So far, TRQ parts have done well for me. I appreciate these vids. Thanks.

[@bowman8316]

Nice !