How to Replace Rear Brakes 2005-2007 Ford Five Hundred

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
This video shows you how to install new, quality TRQ brake pads and rotors on your 2005-2007 Ford Five Hundred. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obhX/1A...
• Pry Bar 1aau.to/oSC/1AX...
• 13mm Wrench 1aau.to/oUT/1AX...
• 13mm Socket 1aau.to/obrw/1A...
• 15mm Socket 1aau.to/obrw/1A...
• 19mm Socket 1aau.to/oafr/1A...
• Brake Caliper Hanger 1aau.to/oiq/1AX...
• Brake Caliper Piston Rewind Cube Tool 1aau.to/ot/1AXA...
• Pliers
• 1/2 Inch Impact Gun 1aau.to/osn/1AX...
• 3/8 Inch Impact Gun
• T40 Bit 1aau.to/oDt/1AX...
• T40 Socket
• Ratchet 1aau.to/obyx/1A...
• Torque Wrench 1aau.to/oaCn/1A...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oBG/1AX...
• Copper Anti-Seize
• Gloves 1aau.to/o2k/1AX...
• Rust Penetrant
• Safety Glasses 1aau.to/oTt/1AX...
• Floor Jack 1aau.to/o3E/1AX...
• Jack Stands 1aau.to/oSi/1AX...
• Pick 1aau.to/oNh/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/osz/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@evillavabear121]

Glad to see older cars like this one(what I have atm) having tutorials out for it. Thank you

[@Mikeys616]

Perfectly timed video. Doing this job today

[@FOCVS-music]

Bro when I say perfect time. Perfect time I needed to change minds

[@rasbenjie7761]

Please help! I need the name of the cube looking tool you used to tighten the piston? 4:02

[@Mountain-em1oq]

If you move the piston in, what happens next time you replace pads? Don’t you need to push it in while you open bleed screw at some point?

[@derf93]

Did you skip the side that has the parking brake on it?

[@paulthesoundguy1]

Like a heart surgeon

[@c.518]

This the same as ebrake?

[@JohnnyNorthcutt-jh4hp]

To change the wheel bearing

[@JohnnyNorthcutt-jh4hp]

Only the wheel bearing replacement

[@JohnnyNorthcutt-jh4hp]

Wheel bearing

[@steveross6816]

I stand corrected it is like mine

[@steveross6816]

This isn't like my 2005