2013-2016 Ford Fusion Rear Brake Replacement (electronic parking brake retract)

Brake job on a 2013-2016 Ford Fusion SE. this video shows all steps including electric parking brake retract procedure without special tools. Please be safe under your car!

[@robertraber4770]

I just done my 2016. Wasn’t to bad.

[@dreadnought2024]

I like your name! I do the same... Never ever have I been to a shop, unless I worked there.

[@michaelknotts6244]

there is a maintenance mode procedure from the driver seat (key on, gas pedal, e-brake to off position, key off then back on) to disable the e-brake so you don't have to take it apart. the e-brake will retract in maintenance mode. look up "2016 Ford Fusion Electronic Parking Brake Maintenance Mode Procedure"

[@ijfim]

Whoa! Thank you for the tip! Definitely easier than manually winding them down.

[@450thParatrooper]

If you take the caliper off the bracket first, it's a lot easier to get at the bracket bolts.

[@ChrisSmith-sr5pi]

Did you put the car in park service mode before doing this job?

[@ijfim]

No, and the parking brakes were released.

[@rcguy1958]

why wouldn't you just put the system in service mode ?

[@simpleinstants]

Thanks for taking time to share your video and process. I'm following your instructions because they are very clear for me because I do not have special tools, I'm also taking other advices that I read on internet mainly about set EBS into maintenance mode before of changing the brake pads. I also read on internet an advice to remove the liquid brake cap before of doing that.

[@ijfim]

Take all the advice you can find! Thanks for reminding us to watch the fluid level in the engine bay. I think I forgot to mention that.

[@cobyhanks792]

I followed the instructions you gave in the video. The only thing the brake light was flashing so i engaged the parking brake and realsed it and everything is normal now. The parking brake went off. THANKS For the Video it helped out alot.👌🤝

[@ijfim]

No problem. Glad the video helped