How to Replace Rear Engine Mount 2004-2006 Scion xB

Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEMT00247
This video shows you how to install a new engine mount on your 2004-2006 Scion xB. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This process should be similar on the following vehicles:
2004 Scion xB
2005 Scion xB
2006 Scion xB
Tools you will need:
• 14mm Socket 1aau.to/oc/1AXAA00015
• 17mm Socket 1aau.to/oc/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• Ratchet 1aau.to/oc/1AXAA00016
• Socket Extensions 1aau.to/oc/1AXAA00015
• Torque Wrench 1aau.to/oc/1AXAA00044
• Block of Wood
• Floor Jack 1aau.to/oc/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oc/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@spikedspike]

this was great, thank you! 😄this helped me get the final and hardest mount installed. all the old mounts were causing 1st to 2nd gear shift - lightly hitting gears, and this fixed it. did without hoist, used floor jack to get front end up on jack stands, then used scissor jack for transmission support, floor jack on one side of subframe, and transmission jack on other...worked like a charm! 75% of time on taking it down, then 25% of time to put back together --6 hrs total

[@TRQ]

+@spikedspike Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@mylittlescienceproject]

This video right here alone is golden. Way to go guys!

[@thegameandtoycollector8644]

Brother i love your videos. They are so detail oriented. I just wish I had a shop i could lift my car at so I can change this mount. Great videos though

[@lannynavitka8949]

This would be almost impossible without a hoist. With the jack stands and jack used to support the engine/transmission, there would be almost no room to get under the car. Then, there's supporting the sub-frame. You'd need two more supports for that I assume. It's tight under there. I did my Corolla with some ramps and one tire jack to support the engine. This looks terrifying. Great video, though. I needed to see the process.

[@charlys1219h]

Thank you for great educational video very well explained and great view angles.👍 Would you recommend to remplacing the other supports??

[@jfcalix]

I have to do it thanks for the video

[@Nyroc57C]

do you plan on doing a scion xa any time soon?

[@khodayehrangekaman315]

❤ Indeed you are number 1 for the parts, for real.. We bought 2 rear bearings for our xa , awesome quality . Now we need to go order the rear motor mount . We wish you had a shop in Northern Virgina 🫒🫒🫒🫡🫡🫡 🙏🙏🙏

[@stevendiffy768]

What jack are you using to suport the subframe??

[@Wes1487]

Is there a video for 2005 scion xa with a manual transmission?

[@nickroach8431]

Someone installed my thru bolt backwards it makes it more difficult for sure😂

[@sels12420]

If gasket is to be replaced. Not mentioned or showed what direction it goes

[@JoseHernandez-fj9tv]

😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮