How to Replace Rear Shock Absorbers 2013-2016 Dodge Dart

Buy Now!
New Shock Absorber from 1AAuto.com trq.video/ia-1...
New Shock Absorber Set from 1AAuto.com trq.video/ia-1...
This video shows you how to install new rear shock absorbers from TRQ on your 2013-2016 Dodge Dart. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2013 Dodge Dart
2014 Dodge Dart
2015 Dodge Dart
2016 Dodge Dart
Tools you will need:
• 10mm Socket trq.video/obuG...
• 16mm Socket trq.video/obRi...
• 17mm Socket trq.video/obRi...
• 19mm Socket
• 8mm Socket trq.video/obuG...
• Trim Tool Set trq.video/oaoa...
• Locking Pliers trq.video/onw-...
• E18 Inverted Torx Socket
• E4 Inverted Torx Socket
• Torque Wrench trq.video/oaXx...
• Gloves trq.video/oaGg...
• Safety Glasses
• Floor Jack trq.video/oamN...
• Jack Stands trq.video/o9E-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Dodge Dart 5th Generation 2013-2016: • Dodge Dart 5th Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@davidthomas7555]

The top bolts look a lot bigger than an E4 socket. Is possibly an E14?

[@jameskennedy4910]

How different is a 2012?

[@gamehacker100]

My locking pliers won't grip the shaft.